Carl Casto
03-13-2013, 02:45
A Tale of Two Colts (which to buy) … M1911 mfg. 1917 vs. M1911 mfg. 1914 ...
OPINIONS WELCOME ... !!!
Guys …
I have a chance to buy 1 of 2 Colt M1911s, each one belonging to a separate seller.
I want an early, functional representative M1911 that was likely in both WWI and WWII.
Both of these seemingly fit the bill. … Neither are safe queens ... nor do I desire a safe queen.
The first one is shown and described in the thread linked below entitled “Est. value of M1911 mfgd. early to mid 1917â€:
http://www.jouster.com/forums/showthread.php?37184-Est.-value-of-M1911-mfgd.-early-to-mid-1917-...
I do not yet know if this first one has the “P†and “H†marks on the top of the barrel visible through the ejection port (indicating a likely original barrel), but will soon be checking that out. I will also soon learn if the first one has an original, two-toned magazine of the period.
The second one is described below and shown in pics in this and the following posts.
The second one appears to be in similar condition to the first one, perhaps slightly better than the 1st one re metal finish and perhaps slightly worst than the 1st one re wooden grip condition. It was manufactured 3 years earlier than the first one, making it made it 1914 with a serial no. of 86XXX.
The second one does not have the “P†and “H†marks on the top of the barrel (indicating that it is likely either a replacement barrel or that the “P†and “H†marks have worn off the top of the barrel).
The seller of the second one believes that the slide and frame are from the same original gun and they may be. But there also may appear to be a slight difference in patina between the slide and frame of the second gun. See what you think and give me your opinion.
Both guns are priced between $1,500 and $2,000 … with the first one being a couple of hundred more than the second.
If you could only buy one of the guns, and simply wanted an early, functional representative M1911 that was likely in both WWI and WWII … which would you buy … and why?
Looking forward to the feedback of all who wish to post a reply … and please include your reasoning.
Thanks,
Carl
OPINIONS WELCOME ... !!!
Guys …
I have a chance to buy 1 of 2 Colt M1911s, each one belonging to a separate seller.
I want an early, functional representative M1911 that was likely in both WWI and WWII.
Both of these seemingly fit the bill. … Neither are safe queens ... nor do I desire a safe queen.
The first one is shown and described in the thread linked below entitled “Est. value of M1911 mfgd. early to mid 1917â€:
http://www.jouster.com/forums/showthread.php?37184-Est.-value-of-M1911-mfgd.-early-to-mid-1917-...
I do not yet know if this first one has the “P†and “H†marks on the top of the barrel visible through the ejection port (indicating a likely original barrel), but will soon be checking that out. I will also soon learn if the first one has an original, two-toned magazine of the period.
The second one is described below and shown in pics in this and the following posts.
The second one appears to be in similar condition to the first one, perhaps slightly better than the 1st one re metal finish and perhaps slightly worst than the 1st one re wooden grip condition. It was manufactured 3 years earlier than the first one, making it made it 1914 with a serial no. of 86XXX.
The second one does not have the “P†and “H†marks on the top of the barrel (indicating that it is likely either a replacement barrel or that the “P†and “H†marks have worn off the top of the barrel).
The seller of the second one believes that the slide and frame are from the same original gun and they may be. But there also may appear to be a slight difference in patina between the slide and frame of the second gun. See what you think and give me your opinion.
Both guns are priced between $1,500 and $2,000 … with the first one being a couple of hundred more than the second.
If you could only buy one of the guns, and simply wanted an early, functional representative M1911 that was likely in both WWI and WWII … which would you buy … and why?
Looking forward to the feedback of all who wish to post a reply … and please include your reasoning.
Thanks,
Carl