Anybody install a Timney trigger on a O3

[Truman]

Picked up a used Timney trigger at a gunshow that appears to be like new but has no directions on install or adjustment. Any experience here with these. Thanks Truman

[Tom06]

Truman,
I did not get your email and your in box is full. Please P/M me about drill receivers.
I also am interested in the Timney trigger.
All the best

Tom Young

[Kurt]

My first Remington 03 had been set up for match shooting and has a Timney trigger in it. I haven't had to adjust it, no need to, it's just right as I got it. I haven't had it apart in a couple years but if I remember correctly, you have to notch out a small area in the stock to clear. Great trigger!

Kurt

[PhillipM]

My sporter 03a3 came with one, I like it. Like Kurt said, the slot for the trigger will need to be widened for it to fit. The only downside is I like to uncock my unloaded rifle by pulling the trigger while holding the cocking piece back with the same hand. With down pressure on the bolt, the striker will not release.

Here's the instructions:

https://timneytriggers.com/InstallInstructions/SP%20SO3A3%20&%20Enfield.pdf