45acp bullet mold question

[Allen]

I noticed that Lee has a 200gr .450 mold out for the 45acp. I thought the sizer die was .450 or .451. Most molds I see for this caliber is .452. Any input on this? Do you suppose the .450 is not intended to be run through the sizer die?

[Parashooter]

Here are listings from Lee's website for the three .45 caliber 200-grain molds currently cataloged. Note the nominal diameter is .452" for all three. Where did you see a .450" mold offered?

MOLD DC 452-200 RF
Lee Double Cavity Mold produces a .452 diameter 200 grain round nose bullet suitable for cartridges like 45 ACP, 45 Colt. Handles included.

MOLD DC H&G 68 200 SWC
Lee Double Cavity Mold produces a .452 diameter 200 grain Semi Wad Cutter nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc. Handles included.

MOLD DC TL452-200SWC
Lee Double Cavity Mold produces a .452 diameter 200 grain Semi Wad Cutter nose bullet suitable for cartridges like 45 ACP, 45 Colt, etc. Handles included.

In actual practice, as-cast diameter can vary considerably with alloy, temperature, and technique. If bullets cast consistently under desired size, a different alloy (usually with more antimony) will often produce greater diameter.

http://leeprecision.com/files/products/BulletMolds.jpg

[Allen]

Wow, thanks for the reply and detailed info. Here is where I saw the mold for sale:

http://www.ebay.com/itm/121229479620?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_1967wt_675

[KeithNyst]

The mold at that link is intended for Black Powder Revolvers, produceing a .450 diameter, 200 grain round nose bullet for .44 Remington Caliber. See this link for more info on it: https://fsreloading.com/lee-precision-mold-dc-450-200-1r-90382.html

I would not use that mold for 45ACP if it is .450; you would want to look for .452 in the list Parashooter posted.

[Allen]

Thanks Keith.