No5

[Tudorp]

Been looking for a No5 Mk1 for some time. Finally landed one. Think I did pretty good. It is a number's matching, post war (1947). Pretty excited to add it to my Milsurp weapon collection. Now, I just need to find a bayonet and sling for it. Other than that, the only thing it needs is a front sling swivel (I have one on the way) and bullets.. Can't wait to take it to the range.

http://i1238.photobucket.com/albums/ff490/Tudorp/Jungle%20Carbine/JC3_zps2c2b1a3c.jpg

http://i1238.photobucket.com/albums/ff490/Tudorp/Jungle%20Carbine/JC2_zpse7966b75.jpg

[BruceHMX]

Fun rifles and a nice catch. I shoot mine with a reduced load that makes it fun and less painful.

[SMOKEY]

Watch IMA-USA for bayo and slings are plentiful, unless you are looking for a specific time era. Watch Liberty Tree Collectors also. Love mine, never paid much attention to recoil. In the .308 range

[Tudorp]

I see repops at IMA, but I want to find an authentic one, so I'll wait till I can find one. I haven't taken it to the range yet, but looking forward in shooting it. I hear it isn't quite as bad as a soviet M44, which I also have and enjoy shooting. Might be a bit more than the Garand which I also love to shoot. Having and shooting the M44 and the Garand, I suspect the JC to be somewhere inbetween the too for recoil so it shouldn't be anything Im not accustom to. Im kinda a recoil junky anyway, so maybe I'll get a fix from it too.. lol.. Thanks fokes. I'll most likely post a post range report on it before too long too.

I already ordered an authentic sling for it, and the correct sling swivel (notice it's missing that on the front). Found one of those at Southwestern Shooters Supply. So, we're getting there. Ya got to know how to accesorize.. ;)

[p246]

I have a 1945. It thumps but no more than my M95 carbine or a M44, more than a Garand. I have an extra WSC bayonet that went through a rearsenal. I might part with it, give me a day to think about it.

[John Sukey]

That rubber buttpad is not to protect your shoulder, but rather to protect the floor of the aircraft!:icon_lol:

[Tudorp]

P246, give it some thought, and let me know.

Actually, the butt pad on these contrary to popular belief was not intended to be a recoil pad, but rather an "anti-slip" feature to give some grip on your shoulder over a standard steel butt pad. That said, it didn't do much for that purpose either from what I have read.

[C5M1]

Make sure you check the inside of the butt plate for rust. More than likely be some.


regards, dennis

[Tudorp]

I will do that. I generally completely tear down my vintage firearms when I 1st get them to find and address potential issues to preserve them. I haven't torn down this one yet, but will very soon before I take it to the range.

[jisii]

Congrats on a nice acqutsition. I got one of the bunch imported about 9 years back by SOG if memory serves. It had some pitting umder the wood but nothing serious, I paid $240.00 + shipping for it and still think I got a good deal, I've shot it a fair amount with my handloads and have never noted the "wandering zero" they were supposed to be plagued with. Its definately a fun shooter and a nice piece of history.

[Tudorp]

I can't seem to find import marks on this one, so I figure it was in that early import batch. I looked under the buttplate as suggested and there is no rusting under there. But, under the upper forearm wood, there is some slight pitting where the band is. Its not bad, but it is there where some rusting had started. I cleaned and oiled that up so it won't continue to rust there.

[Tudorp]

Here is better pictures of mine. It has some funky green paint which is also worn off, so no telling how long ago that was painted. But, I am assuming that was something someone did somewhere down the road. I believe all these were originally painted black? Anyone have any ideas of the best way to remove the green paint without messing with the original paint and patina?

http://i1238.photobucket.com/albums/ff490/Tudorp/Jungle%20Carbine/1947JungleCarbine_zps00829635.jpg

[mack]

The black "paint" isn't really paint but a coating of Suncorite, a tough rust resistant finish. The green material was an add-on probably done in Asia as another attempt to save the firearm from the ravages of the local climate.

[Tudorp]

Might that have been done during military service? Or post military? If it is part of its military past history, I would rather keep in as is as part of the rifles service. If it is simply some bubba attemt, id want to undo that.

[mack]

It was likely an addition done while in service in the Federation of Malaysia. Corrosion was obviously an issue in those places in the tropics or sub-tropics. Definitely an in-service addition. Bubba paints all his Enfields Rustoleum flat barbecue black.

[mcook]

Mine has remnants of green paint on it as well, and, as a milsurp, I think it should stay as is.

[phil441]

Don't forget ear protection.

[Tudorp]

Yeah, I found that out shooting my brother in law's .303 this past summer. Was every bit is loud as my Soviet M44. We were shooting his Enfield along side my Arsenal sp101, and it was a bit harsher sounding than the arsenal. But seemed about the same as my M44.

[JB White]

Louder beneath a corrugated tin roof! For nerve-wracking LOUD, try a 10" barreled TC Contender under that same roof in 223 Remington. Behind it wearing ear plugs under the muffs it wasn't too bad. They made me stop due to the flinching it caused down the rest of the line.

[mack]

I have four of these currently and have owned literally several dozen over the last fifty years from well-worn to brand new in original wrapping. That doesn't make me an expert, just a longtime observer. Take care removing the but plate. Put plenty of penetrating oil on the end of the screw and let it soak for several days. The threads are very fine and easily stripped. These WILL NOT restore and original but plates are non-existent, so once those threads are gone, you are phuqued. Proceed with caution.

[Tudorp]

Actually, I already took off the butt plate to check for rust or damage. I am always generally careful when taking apart guns I know little about, so I took that off with care, and found that it is fine threads, so now I know. Kind of like taking off the grips on a 1911 being careful not to mess up the inserts, or the treads on the frame. THOSE are very easy to mess up. The butt plate screw fortunatly came loose easily, but I put some oil in the threads to keep it free. I was lucky that there was no rust issues on the screws, threads or on the butt plate cup.