paroikoi
10-18-2014, 09:37
I am no longer updating this ad because, no matter what email address I try to use, I do not get any email notifications of new replies to threads or new PMs. If you're interested in any of my parts (this list IS obsolete), please email me directly at josh@[the state of TN spelled out].edu and I will point you to where I have my parts listed elsewhere. Thanks, and sorry!
I have the following M1 parts for sale. The prices below do not include shipping. Shipping for any of the items except the op rods, barrels, stocks, or receivers will be $5.25 via USPS Priority Mail. Shipping for the op rods, barrels, or stocks will be $12.50 max each and the receivers $20 max each (I'll refund any excess for any of this). Insurance beyond $50 is extra. I'll be happy to combine shipping.
First unconditional "I'll take it" followed by PM with contact info gets it. Payment is to be via money order or certified bank check. I'll ship the same or next day if you pay via a USPS money order. An "I'll take it and I don't need photos" trumps "I'll take it pending photos." That said, it is my intention to photograph everything, but if someone's willing to save me that work on something still needing photos, they get first dibs.
NOTE: I have these listed on a couple other forums, too. I will update here ASAP if someone elsewhere gets dibs on any of these, but there will be some delay.
Here's what I have:
NEW STUFF (photos to be added soon; sooner upon request)
- IHC hammer, marked IHC and "B", $65
- hammer, -7SA, $27
- WRA firing pin, half-round, 2 available, $22 each
- rear sight, complete, T105E1 FZR elevation, DRC windage, $69
- gas cylinder lock screw, P with large hex, like new, $22
- trigger guard, C-46025-1-SA, black, appears unused with perfectly round lugs, $49
- clip latch, round front WWII SA without pin or spring, reparked, $29
- clip latch, square front SA without pin or spring, original finish, $25
- trigger & sear assy, WWII SA, 4 available at $8 each
- front sight, SA without screw, $5
- firing pin, SA half-round, 2 available, $13 each
- firing pin, SA half-round, early pewter-color unfinished (bare) w/punch mark, 2 available, $29 each
PREVIOUSLY LISTED STUFF (prices may be new)
- receiver, SA S/N 3,814,957 (6/1945). Has some serious pitting in a couple places below the wood line and some pitting on the right side below the op rod track. Comes with CMP certificate. was $265 NOW $249
- receiver, SA S/N 3,241,757 (11/1944). Excellent condition. Comes with CMP certificate. was $329 NOW $299
- WRA stripped receiver, S/N 1,256,167 (11/1942). Comes with CMP certificate. (photos added) was $449 NOW $425
- HRA barreled receiver w/what I believe to be the original HRA barrel, rear HG & lower band, rear sight, and clip latch. There is a short crack in the rear HG. The bore looks bad and the last several inches of the outside of the barrel are AWFUL. Everything else is VG to excellent condition. Comes with CMP certificate. (photos added) was $549 NOW $499
- HRA follower arm, late with flat lugs, $18
- IHC follower rod, with stamp lines on each side, $14
- WRA butt plate, 2S on inside, trap door doesn't close quite flush, $40
- WRA butt plate ("WRA butt plate no2" in the photos), very worn, so I'm not positive it's WRA, from the inside it has defined borders on checkering and offset holes, no "2S" on the inside. $30
- WRA clip latch, round front, $45
- WRA trigger housing, large pad (unmodified) D28290-W.R.A. (with hyphen), with spring, excellent condition, (no photos yet) $89
- barrel, S-A-8-48, CMP rated it MW 2+, TE 4+, chamber not in-the-white, pads chromed, $75
- bolt, complete, -12SA heat lot S-11<>, 10/1942 thru 12/1942, $49
- follower/slide assy, early revision 8, excellent condition, $25
- gas cylinder, HRA?, post-war wide base without sight, has HRA "oily" look, finish is scuffed in a few place, $99
- gas cylinder, post-war SA wide base with sight, VG condition except one scrape along side, $89
- gas cylinder lock screw, marked w/small "o" only (no P), well used, (no photos yet) $18
- gas cylinder lock screw, marked w/P and small hexagon, used VG, (no photos yet) $20
- gas cylinder lock screw, marked w/P and small hexagon, like new, (no photos yet) $22
- gas cylinder lock screw, P with small hexagon, $19
- gas cylinder lock screw, marked w/small "o" only (no P), $21
- gas lock, SA WWII, 5 available at $16 each
- hammer, -3SA, original finish, $20
- hammer, -9SA, excellent condition, (no photos yet) $39
- hammer, -3SA, excellent condition, (no photos yet) $21
- internal part set "A" (follower assy, follower arm & pin, follower rod & spring, bullet guide, op rod catch, clip latch w/pin & spring), $89
- internal part set "C" (follower assy, follower arm & pin, follower rod & spring, bullet guide, op rod catch, NO clip latch), $69
- op rod, -9SA flat side UNCUT, piston measures 0.526", $139
- op rod, 6535382 SA, piston measures 0.525", $159
- op rod catch assy, EARLY no lip accelerator, late body, (no photos yet) $45
- stock, post-war SA with original JLG cartouche, ordnance wheel, and no rebuild marks, $269
- stock, birch post-war, no cracks or markings of any kind. Comes with metal but no hand guards. $79
- trigger group, complete: -5SA housing, -2SA hammer, unmarked safety, milled guard - excellent original? finish, (no photos yet) $109
- trigger group, complete: -14SA housing (has some pitting), -3SA hammer, -9SA safety, stamped guard - some parts reparked, (no photos yet) $89
- trigger guard, stamped WWII SA w/milled hook, $19
STUFF SOLD PENDING FUNDS
- op rod, D35382 SA, piston measures 0.525", has some discoloration on shaft, $115 - SPF
- gas cylinder lock screw, marked w/serif P and triangle, $21 - SPF
- WRA clip latch, round front, $45 - SPF
- gas cylinder, wide base WWII SA saw-cut, without sight, $65 - SPF
- trigger housing, -14SA, with spring, excellent condition, $24 - SPF
- op rod, -9 SA curved side cut/modified, piston is 0.525" but side of shaft has pitting, $110 - SPF
- WRA stock, short channel, partial GHD cartouche visible, no rebuild stamps, $249 - SPF
- internal part set "B" (follower assy, follower arm & pin, follower rod & spring, bullet guide, op rod catch, clip latch w/pin & spring), $89 - SPF
- rear sight base & aperture, SA, $25 - SPF
- gas cylinder, wide base WWII SA marked "Q", with front sight, $79 - SPF
You can see photos of all this stuff here:
http://s24.photobucket.com/user/iokiorap4gew/library/M1%20parts
I have the following M1 parts for sale. The prices below do not include shipping. Shipping for any of the items except the op rods, barrels, stocks, or receivers will be $5.25 via USPS Priority Mail. Shipping for the op rods, barrels, or stocks will be $12.50 max each and the receivers $20 max each (I'll refund any excess for any of this). Insurance beyond $50 is extra. I'll be happy to combine shipping.
First unconditional "I'll take it" followed by PM with contact info gets it. Payment is to be via money order or certified bank check. I'll ship the same or next day if you pay via a USPS money order. An "I'll take it and I don't need photos" trumps "I'll take it pending photos." That said, it is my intention to photograph everything, but if someone's willing to save me that work on something still needing photos, they get first dibs.
NOTE: I have these listed on a couple other forums, too. I will update here ASAP if someone elsewhere gets dibs on any of these, but there will be some delay.
Here's what I have:
NEW STUFF (photos to be added soon; sooner upon request)
- IHC hammer, marked IHC and "B", $65
- hammer, -7SA, $27
- WRA firing pin, half-round, 2 available, $22 each
- rear sight, complete, T105E1 FZR elevation, DRC windage, $69
- gas cylinder lock screw, P with large hex, like new, $22
- trigger guard, C-46025-1-SA, black, appears unused with perfectly round lugs, $49
- clip latch, round front WWII SA without pin or spring, reparked, $29
- clip latch, square front SA without pin or spring, original finish, $25
- trigger & sear assy, WWII SA, 4 available at $8 each
- front sight, SA without screw, $5
- firing pin, SA half-round, 2 available, $13 each
- firing pin, SA half-round, early pewter-color unfinished (bare) w/punch mark, 2 available, $29 each
PREVIOUSLY LISTED STUFF (prices may be new)
- receiver, SA S/N 3,814,957 (6/1945). Has some serious pitting in a couple places below the wood line and some pitting on the right side below the op rod track. Comes with CMP certificate. was $265 NOW $249
- receiver, SA S/N 3,241,757 (11/1944). Excellent condition. Comes with CMP certificate. was $329 NOW $299
- WRA stripped receiver, S/N 1,256,167 (11/1942). Comes with CMP certificate. (photos added) was $449 NOW $425
- HRA barreled receiver w/what I believe to be the original HRA barrel, rear HG & lower band, rear sight, and clip latch. There is a short crack in the rear HG. The bore looks bad and the last several inches of the outside of the barrel are AWFUL. Everything else is VG to excellent condition. Comes with CMP certificate. (photos added) was $549 NOW $499
- HRA follower arm, late with flat lugs, $18
- IHC follower rod, with stamp lines on each side, $14
- WRA butt plate, 2S on inside, trap door doesn't close quite flush, $40
- WRA butt plate ("WRA butt plate no2" in the photos), very worn, so I'm not positive it's WRA, from the inside it has defined borders on checkering and offset holes, no "2S" on the inside. $30
- WRA clip latch, round front, $45
- WRA trigger housing, large pad (unmodified) D28290-W.R.A. (with hyphen), with spring, excellent condition, (no photos yet) $89
- barrel, S-A-8-48, CMP rated it MW 2+, TE 4+, chamber not in-the-white, pads chromed, $75
- bolt, complete, -12SA heat lot S-11<>, 10/1942 thru 12/1942, $49
- follower/slide assy, early revision 8, excellent condition, $25
- gas cylinder, HRA?, post-war wide base without sight, has HRA "oily" look, finish is scuffed in a few place, $99
- gas cylinder, post-war SA wide base with sight, VG condition except one scrape along side, $89
- gas cylinder lock screw, marked w/small "o" only (no P), well used, (no photos yet) $18
- gas cylinder lock screw, marked w/P and small hexagon, used VG, (no photos yet) $20
- gas cylinder lock screw, marked w/P and small hexagon, like new, (no photos yet) $22
- gas cylinder lock screw, P with small hexagon, $19
- gas cylinder lock screw, marked w/small "o" only (no P), $21
- gas lock, SA WWII, 5 available at $16 each
- hammer, -3SA, original finish, $20
- hammer, -9SA, excellent condition, (no photos yet) $39
- hammer, -3SA, excellent condition, (no photos yet) $21
- internal part set "A" (follower assy, follower arm & pin, follower rod & spring, bullet guide, op rod catch, clip latch w/pin & spring), $89
- internal part set "C" (follower assy, follower arm & pin, follower rod & spring, bullet guide, op rod catch, NO clip latch), $69
- op rod, -9SA flat side UNCUT, piston measures 0.526", $139
- op rod, 6535382 SA, piston measures 0.525", $159
- op rod catch assy, EARLY no lip accelerator, late body, (no photos yet) $45
- stock, post-war SA with original JLG cartouche, ordnance wheel, and no rebuild marks, $269
- stock, birch post-war, no cracks or markings of any kind. Comes with metal but no hand guards. $79
- trigger group, complete: -5SA housing, -2SA hammer, unmarked safety, milled guard - excellent original? finish, (no photos yet) $109
- trigger group, complete: -14SA housing (has some pitting), -3SA hammer, -9SA safety, stamped guard - some parts reparked, (no photos yet) $89
- trigger guard, stamped WWII SA w/milled hook, $19
STUFF SOLD PENDING FUNDS
- op rod, D35382 SA, piston measures 0.525", has some discoloration on shaft, $115 - SPF
- gas cylinder lock screw, marked w/serif P and triangle, $21 - SPF
- WRA clip latch, round front, $45 - SPF
- gas cylinder, wide base WWII SA saw-cut, without sight, $65 - SPF
- trigger housing, -14SA, with spring, excellent condition, $24 - SPF
- op rod, -9 SA curved side cut/modified, piston is 0.525" but side of shaft has pitting, $110 - SPF
- WRA stock, short channel, partial GHD cartouche visible, no rebuild stamps, $249 - SPF
- internal part set "B" (follower assy, follower arm & pin, follower rod & spring, bullet guide, op rod catch, clip latch w/pin & spring), $89 - SPF
- rear sight base & aperture, SA, $25 - SPF
- gas cylinder, wide base WWII SA marked "Q", with front sight, $79 - SPF
You can see photos of all this stuff here:
http://s24.photobucket.com/user/iokiorap4gew/library/M1%20parts