PDA

View Full Version : Remington 1903a3 question



rockisle1903
02-10-2015, 07:04
Did any 4,000,000+ serial number Remingtons get issued in the field or did they basically sit in warehouses...The reason I ask is I just purchased one, worn, no rebuild marks and, I believe, has never been apart since issue as the bayonet mount screw is still staked and never been been out of the gun along with pristine screw heads on the rest of the rifle...Cartouches worn but present (RA/ boxed FJA) along with a large number 2 paint stenciled near the top of the buttplate on the top of the stock...Serial 4,079,453 with a 9/43 RA 2 groove barrel..All parts blued that should be (bands have gone to patina as has the trigger guard). How common are these "used non rebuilt" as I usually see these mint/unissued?...Will post pics in a couple days...Mike2994729948299492995029951

Rick the Librarian
02-10-2015, 11:20
Keep in mind the rifle has been "out of service" for some 70 years. Just about anything could have happened. Even if it didn't go through military service, it could have been used for hunting, drill teams, just "banged around, or one of a million other uses that would have produced the wear. It all depends what happened to the rifle AFTER it left the military.

rockisle1903
02-10-2015, 01:05
Thanks for the reply Rick..It is hard to say how this one ended up the way it did and without documentation it is all just a story...

kcw
02-10-2015, 01:53
Remember too that the DCM-NRA sold two grades of A3's, "serviceable" & "unserviceable". From my experience the "serviceable" category was comprised of arsenal overhauled rifles (often thought to be new) and unissued rifles. The "unserviceable" category, which sold for about half the price of the serviceable rifles, were obviously issued, and while advertised as having good headspace, also had minor defects for which they had been set aside for in the 1st place. Typically this would include such things as bent swivels & front sight blades, cracked hand guards etc. The unserviceable inventory existed because the army had simply quit sending used A3's to rebuild. My cousin has an "unserviceable" Remington A3 that came from the DCM-NRA program with the butt stock chipped out at the butt plate. The rifle was obviously issued but the bore is excellent, nonetheless such a defect would require that the rifle be repaired, especially if it were destined for overseas duty. If memory serves me, serviceable A3's sold for $49 & unserviceable for $20, plus RR Express shipping. in the early 60's.

Darreld Walton
02-11-2015, 07:13
You also didn't ask "issued to WHO's Army"!

tmark
02-11-2015, 07:35
You also didn't ask "issued to WHO's Army"!

Should that be "issued to WHOM's Army"?

Johnny P
02-11-2015, 07:40
The DCM also sold a number of Remington Rand 1911A1 pistols that were new unissued in the original shipping boxes that were classified as unserviceable. Also, large number of the pistols sold were the Model 1911 pistols that were fresh from rebuild, and also classified as unserviceable.

Southron
02-11-2015, 11:13
A good "Tip Off" if the rifle was used by an ROTC school unit is a rifle that has a scratched and worn butt-plate and pretty much a pristine bore.The butt plate gets "worn" from being banged down {"Order Arms!!! HUH!} and on pavement time after time over several years.

ROTC units are notorious for using the rifles for a lot of drilling and no shooting!

rockisle1903
02-22-2015, 01:02
here are a couple more2995229953299542995529956

03Rifleman
02-22-2015, 04:05
Used but not abused it appears to me...nice rifle to have !