PDA

View Full Version : Stevens Model 77F cartridge stop question, please..


glindes
07-04-2015, 11:49
Happy Independence Day!
I just acquired a Stevens M77F .410 bore shotgun. It is in beautiful shape. The problem/symptom is that cartridges, when inserted in the magazine tube, are not held in place (in the mag tube); they just slide back outward. It appears the Cartridge Stop (I believe that's the correct part ID) is bent. Maybe bent upward? I don't have another M77 to compare/contrast. Please see my pics and advise. I don't want to bend it incorrectly and break it. Thanks for looking.
Forearm full forward:
http://i57.tinypic.com/msgby9.jpg
http://i62.tinypic.com/2pqq42f.jpg
Forearm full rearward:
http://i58.tinypic.com/2yloaaa.jpg
http://i58.tinypic.com/1412zgn.jpg
Cartridge push not held in mag tube - forearm full forward
http://i58.tinypic.com/2gwxnns.jpg

Ideally if some could post similar pix---WAY big help- and Thank you. Geoff in DE (email: glindes@Verizon.net)
da gimp
07-10-2015, 06:48
you might try posting this on the small arms page too... as it isn't really a military shotgun . I wonder if any of the shotgun gurus and gunsmiths that hang out there ever come over to this board.........you'll have a better chance of it being answered there or heck if it's on both this board & the other.... hope this helps you out. From what I could see the end looked okay to me... if it is being activated enough when the slide is racked......good luck hand. Nice quality pix too.
glindes
07-12-2015, 09:23
Don't forget all those STEVENS Model M77E riot guns, FYI


you might try posting this on the small arms page too... as it isn't really a military shotgun . I wonder if any of the shotgun gurus and gunsmiths that hang out there ever come over to this board.........you'll have a better chance of it being answered there or heck if it's on both this board & the other.... hope this helps you out. From what I could see the end looked okay to me... if it is being activated enough when the slide is racked......good luck hand. Nice quality pix too.
PhillipM
07-13-2015, 01:24
Message Emri, he hangs out on the 03 board. He has been a professional gunsmith since 1983 or so and has seen it all.
glindes
07-13-2015, 06:52
10-4. Emri found me last week on CMP forum. Great help from him.


Message Emri, he hangs out on the 03 board. He has been a professional gunsmith since 1983 or so and has seen it all.