PDA

View Full Version : What do I have?



Deepsearn
01-09-2016, 02:24
I just picked this up today and don't know what it is other than an '03 receiver. Serial # 925803. I can't find any '03 configuration like this. Could it be an aftermarket rebuild? Any help from the resident guru's would be greatly appreciated. Thank you!

http://i1014.photobucket.com/albums/af265/muddiver1/image_58.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_56.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_60.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_55.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_57.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_59.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_61.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_64.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_65.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_66.jpeg

Deepsearn
01-09-2016, 02:34
http://i1014.photobucket.com/albums/af265/muddiver1/image_68.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_67.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_69.jpeg

http://i1014.photobucket.com/albums/af265/muddiver1/image_70.jpeg

Parashooter
01-09-2016, 03:18
. . . Could it be an aftermarket rebuild? . . .Yes. A nice type C stock, 03-A3 handguard, and Williams "Foolproof" receiver sight. Such assemblies were common for low-level competition a half-century ago. Equipped with Lyman or Redfield target sights, it could be a decent mid-level competitor.

John Beard
01-09-2016, 03:22
Seasons' Greetings!

You have a WWI service rifle overhauled and re-barreled in 1942 that a private individual has substantially customized into his personal target rifle. As can be seen from your photos, he jeweled the bolt, sanded and shellacked the stock, removed the original barrel-mounted rear sight, installed a commercial receiver sight, and replaced the original M1903 handguard with a longer M'03-A3 handguard.

Hope this helps. Happy New Year!

J.B.

Deepsearn
01-09-2016, 03:24
Thank you for the information. Did I overpay at $450.? Thanks again!

Fred
01-09-2016, 04:12
No, I like it. It was somebody's target rifle. Nice looking customized rifle!

John Beard
01-09-2016, 04:28
Thank you for the information. Did I overpay at $450.? Thanks again!

Seasons' Greetings!

No. But don't plan on selling it anytime soon for a large profit. If so, you will incur competition from P.T. Barnum.

Happy New Year!

J.B.

Deepsearn
01-09-2016, 04:35
No, I'm not planning on selling. I was looking for a nice shooter to use for period rifle competition. I would have had one in the original configuration but I'm happy with this one and the condition that it is in. I have a couple of 52's and an older 40x so I have several nice sight sets, Olympics, internationals and a 575. One of those should work nicely.

John Beard
01-09-2016, 06:19
No, I'm not planning on selling. I was looking for a nice shooter to use for period rifle competition. I would have had one in the original configuration but I'm happy with this one and the condition that it is in. I have a couple of 52's and an older 40x so I have several nice sight sets, Olympics, internationals and a 575. One of those should work nicely.

Seasons' Greetings!

Depending on the rules, you may have a problem using your new rifle in competition. Most service rifle competition rules do not permit significant modification of the rifle.

Good Luck! And Happy New Year!

J.B.

Deepsearn
01-10-2016, 05:23
Thanks, John. Looks like I'll be searching for a second one, this time in original configuration. :)

Jim in Salt Lake
01-11-2016, 11:46
CMP has an unlimited category for M1s that allows national match prepped M1s. I wish they'd do this for match prepped 1903s that were built when the 1903 was a legal service rifle. I see some really cool rifles that were match modified back in the day, would be fun to get them back on the line, again, in their own class.

dave
01-12-2016, 07:14
I have a similar rifle I built up from a Rem. barreled action. Used it in informal comp. years ago. Original sight, A3 pistol grip stock and 03 handgaurd.

Kurt
01-12-2016, 08:30
Somewhat popular at one time. I have a Rem 03 that retains the barreled rear sight but has the Lyman 48 as well. All in an A3 stock with an 03 hand gaurd.