1873 trapdoor

[Lethemgo]

New to a trapdoor but excited to get her out to the range. Just wanted to show it off and see if anyone sees any problems. Dates in 1888 but looks like some one had maybe refinished it at least the wood. Was worried because I didn't see a cartouche on stock but getting it in the sun today I can see where there was one and maybe just thinned down. Has the cleaning rod you have to lift out of slot to remove. Haven't taken completely apart yet but will do that soon. Might shoot some light smokeless loads but being a muzzeloader shooter want to try to stick with mostly blackpowder. Don't have any 2f right now just 3f and 4f so probably this weekend will be smokeless. Thanks for any suggestions.

http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104012.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104012.jpg.html)
http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104035.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104035.jpg.html)
http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104041.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104041.jpg.html)
http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104119.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104119.jpg.html)
http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104128.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104128.jpg.html)
http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104157.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104157.jpg.html)
http://i947.photobucket.com/albums/ad317/lethemgo/20161206_104329.jpg (http://s947.photobucket.com/user/lethemgo/media/20161206_104329.jpg.html)

[Dick Hosmer]

Yes, it has been refinished (the block and tang should be color-casehardened) but is still very attractive. Should be the source of a lot of enjoyment. If you take it apart - and I wouldn't unless it was necessary - be very careful so as not to chip the wood around the lock, etc. Good disassembly instructions can be found at www.trapdoorcollector.com

[Tom Trevor]

Should be close on at 100 yards as it looks like the front sight blade has been replaced with a taller one.

[JimF]

As has been said . . . .

DON'T take it apart unless ABSOLUTELY NECESSARY!! (Especially the LOCK and TRIGGER GUARD!!)

If you don't know what you are doing, you WILL chip some wood!!! --Jim

[Fred]

The thing is, if it ain't broke, don't fix it.
However, before a lock is removed, the Tang Screw should be given a couple of turns to loosen it. This will help to relieve the binding of the lock plate Mortis on the lock plate. No pinching.
If you want to remove the barrel, it's a good idea to give the two lock plate mounting screws a turn or so first to help relieve any pinching the stock would have on it around the breech end of the stock.