rem m40 barrel

[k arga]

Where can I get a 1966 m40 contour barrel?
thanks
kurt

[paul v]

24 inch Rem var contour, .830" at the muzzle (flat crown), 1.25"@ breach (1 - 10 twist).

krieger's remington varmint barrel is a match: https://kriegerbarrels.com/contours#sptr
Shilen's #17 rem varmint is close: http://www.shilen.com/contours.html

[k arga]

thanks, don't I know you from some where.

[Sunray]

It's just a heavy varmint/match barrel, as I recall. Nearly(if not all) every barrel maker makes one. I think the Douglas Rem Mag Sporter 005 at $314.00 ready to install is what you're looking for.
http://www.douglasbarrels.net/contours/
Then you get to argue about who's barrel is best. snicker.

[pmclaine]

Bartlein makes a purpose built replica copied from one of Badger Ords originals.

[k arga]

I have a 700 vs on the way to make a fake m40, will be using a Taylor stock. Will try to get the rest of the real parts to make it look right but still a repo.
Mr pmclaine, looked a Bartlein but 5 to 6 mo is to long for me to wait , thanks .

kurt

[k arga]

I have a 700 vs on the way to make a fake m40, will be using a Taylor stock. Will try to get the rest of the real parts to make it look right but still a repo.
Mr pmclaine, looked a Bartlein but 5 to 6 mo is to long for me to wait , thanks .

kurt

[pmclaine]

If you need someone for machining the receiver cuts Mark at Raven Rifles, Pulaski VA knows what to do.

He built this USMC inspired rifle for me and I couldn't be happier...

http://i1005.photobucket.com/albums/af178/pmclaine/P1217291_zps3c4gf0x2.jpg (http://s1005.photobucket.com/user/pmclaine/media/P1217291_zps3c4gf0x2.jpg.html)
http://i1005.photobucket.com/albums/af178/pmclaine/P1217290_zpsjhl7y3cg.jpg (http://s1005.photobucket.com/user/pmclaine/media/P1217290_zpsjhl7y3cg.jpg.html)