PDA

View Full Version : seen an A4 odd logo position


milboltnut
02-25-2017, 04:18
http://pics.gunbroker.com/GB/623917000/623917164/pix502243207.jpg
BEAR
02-25-2017, 07:50
Ummmm ... is this a joke? Or are you really serious about the A4 marking?
BEAR
02-25-2017, 07:56
Sorry, I don't want to seem rude or condescending, I thought there might be a punchline to your query.
Randy
02-25-2017, 08:16
Correct me If I'm wrong, but isn't the US roll mark to far to the left on the receiver? It looks like the serial number would be under the scope base.
BEAR
02-25-2017, 08:30
Ok, the A4(03-A3) is correctly marked on the left side and the serial # is left in its original position so that can be read with the scope base on.

BEAR
Randy
02-25-2017, 08:37
Gotcha.....
m1903rifle
02-25-2017, 08:46
Both are moved to the side. If the serial number wasn't moved, the scope base would cover the number. Also, on the A4, the font size on the serial number is smaller.
BEAR
02-25-2017, 10:44
Well, at least I was half right.
milboltnut
02-26-2017, 04:45
wasn't thinking sorry.

Kinda thinking what can possibly go wrong with the rifle...(that would need to relocate make/model) other than the scope or mount which has to be removed anyway to fix.. so then the make/model would be exposed. Seems like a waste of time to do this.
BEAR
02-26-2017, 09:04
wasn't thinking sorry.

Kinda thinking what can possibly go wrong with the rifle...(that would need to relocate make/model) other than the scope or mount which has to be removed anyway to fix.. so then the make/model would be exposed. Seems like a waste of time to do this.

You have nothing to apologize for (bad grammer). I guess I was assuming you were making a funny because you have been on this forum a while and your question about the markings is usually made by people new to 03s. But then we are all learning.
Several months ago an aquaintance who is very knowledgeable about M1 Garands asked me about a low numbered Springfield he was looking to buy. I asked him "Springfield or Rock Island"? He said "Remington". I did my Spock, one eyebrow raise, look and then explained the low number 03 story. Yes, we all are still learning.
milboltnut
02-26-2017, 01:04
I'm not a knowledgeable as you would think.. just because I frequent here on JSP.

Would you think ANYBODY, here , knows the difference between a A3 and a 03... it just seemed, at first, a little odd of the lo-cal and to me not necessary. Just figured there was a reason, that was beyond the average Joe.
jgaynor
02-26-2017, 09:36
The shim appears much longer than normal. The markings look ok to me.