PDA

View Full Version : Value of TE gauge for 1903 & 30 cal machine gun


1563621
06-01-2019, 05:43
Had this for years. Looking to sell, price? https://imgur.com/a/CymT4W4
lyman
06-01-2019, 06:28
check ebay sold auctions,

one sold for 65, another for 82 , recently
fguffey
06-02-2019, 07:50
Value of TE gauge for 1903 & 30 cal machine gun

I do not know; if I want one I will make it. The one you have listed has its advantages. The diameter goes from .300" to .394" meaning it could be used for 30 caliber barrels but after the rifling has been shot out beyond .308" the barrel becomes a smoothbore.

F. Guffey
lyman
06-02-2019, 09:20
I do not know; if I want one I will make it. The one you have listed has its advantages. The diameter goes from .300" to .394" meaning it could be used for 30 caliber barrels but after the rifling has been shot out beyond .308" the barrel becomes a smoothbore.

F. Guffey

while that is all well and good ,

and with respect, not relevant,


that gauge is for the 1903, 1917 and the M1919/1917 MG's as well,
JOHN COOK
06-02-2019, 10:52
Amen +++++++

john in SC
1563621
06-03-2019, 06:28
Thanks all for the replies. IDK might keep it.
fguffey
06-03-2019, 08:44
I do not know; if I want one I will make it. The one you have listed has its advantages. The diameter goes from .300" to .394" meaning it could be used for 30 caliber barrels but after the rifling has been shot out beyond .308" the barrel becomes a smoothbore.

F. Guffey

Lyman claims "it is not relevant" the gage will fit more different diameters barrels including 8MM, .338" .350 etc. To look at this gage as a 30 Cal gage is to look at it through beady little eyes.

F. Guffey
lyman
06-03-2019, 09:08
Lyman claims "it is not relevant" the gage will fit more different diameters barrels including 8MM, .338" .350 etc. To look at this gage as a 30 Cal gage is to look at it through beady little eyes.

F. Guffey

actually, I claim you comment about making one is not relevant to the question asked, (value of the gauge,,)

my bright baby blues see it fine as long as I am wearing my readers,,,,
Col. Colt
06-06-2019, 12:54
If you think you ever might need it again, keep it. It's kind of fun using "The Real Thing" to check your weapons, and I have used mine to help out friends who were purchasing or selling an '03/M1917 and wanted to know what they had. CC
Randy A
08-08-2019, 09:52
It's only accurate for the firearms listed on it (and the 1917) due to how it is read. This is all based on the dimensions of the assembled unit with the 1903 series and 1917. Using the machine gun scale you can also gage uninstalled 1903/A3 barrels, (through extractor cut). Note, there is a problem reading TE on 1942 and later barrels due to changes implemented in 42. I made a cheat sheet and posted it here and other sites a few years ago. Will post it when I have a few minutes.

https://i.imgur.com/iICltNxl.jpg