View Full Version : 1903A4
Defender3
01-04-2021, 04:09
I haven't been active on the forums for some time due to a mixture of life and other issues.
I thought I'd repost some pictures of my A4 for the crowd since the ones posted previously are no longer hosted. The rifle is an Augusta rebuild that went through the CMP (maybe the 90's lottery?) and that I bought in 2007. It was sold sans optic, but I added a 330 / M8 and later upgraded to the now M73B1 shown.
48673
48674
48675
48676
48677
Beautiful, thank you for posting. How does it shoot?
John Beard
01-08-2021, 10:12
Please oblige us with a picture of the complete serial number and pictures of the stock markings.
Thanks! And Happy New Year!
J.B.
p.s.,
Nice rifle and scope!
Defender3
01-09-2021, 04:31
Beautiful, thank you for posting. How does it shoot?
The rifle probably shoots better than me! It seems to prefer the Hornady Garand load. Here's a range day from last year showing 100y prone groups (off my range bag) with the M2 ball and one with the Hornady.
48752
Please oblige us with a picture of the complete serial number and pictures of the stock markings.
Thanks! And Happy New Year!
J.B.
p.s.,
Nice rifle and scope!
Thanks! Here you go:
48753
48754
48755
48756
Defender3
01-09-2021, 04:39
One of the M73B1 plate.
48759
The 330 / M8 I originally had on the rifle:
48760
48761
John Beard
01-11-2021, 11:09
Thanks! Much obliged. You have a fine rifle.
Thanks again! And Happy New Year!
J.B.
p.s.,
Is that a full pistol grip stock? Or a scant grip stock? Please advise. And thanks again!
Defender3
01-12-2021, 04:07
John,
Pistol grip stock.
48773
Johnny P
01-12-2021, 11:13
Interesting that it is one of the 03-A4's that has been "corrected" by having the last 3 in 03-A3 marked out and a 4 added. They are seen occasionally, and since yours is an Augusta rebuild maybe that is where this was done.
John Beard
01-12-2021, 04:28
Thanks for taking the time to make and post the additional photo!
Yes, Augusta Arsenal X'd out the "3" and stamped a "4" behind it. I saw several of these altered rifles at the CMP and all came from Augusta Arsenal.
J.B.
PeteDavis
01-13-2021, 09:29
That's a nice one. I have an RRA rebuild that also has a parkerized bolt.
Pete Davis
Hal O'Peridol
03-03-2021, 06:17
I recently purchased 3 1903A4's from an estate, all are RIA rebuilds, each with a different level of 'rebuilding'
None had the restamped A4. I guess Rock Island did not do that.
Mine likes Hornady 168 grain Match HPBT's with IMR4064. It also came with no scope, eons ago. Paid $175Cdn for it in the early 80's. Put a Bushnell 2.5 to 8 Scopechief on it. Original scopes ran $200US at the time and weren't readily available. It'll shoot one hole groups off a bench at 100 if I do my part.
"...having the last 3 in 03-A3 marked out..." One of the main indicators of a 'fake' as I recall.
Johnny P
03-03-2021, 08:33
The 03-A4's I have seen (pictures) with the last 3 marked out and a 4 added had the correct 03-A4 offset receiver markings.
I'd have to look at mine, but there's no '4' as I recall.
Kragrifle
03-15-2021, 05:45
One of these rifles just showed up on Gunbroker marked 03A3. Could this be a real 03A4?
- - - Updated - - -
I guess a better question would be are all rifles with the offset 03A3 receiver markings real 03A4’s?
Johnny P
03-15-2021, 09:07
While both the receiver of the 03-A3 and 03-A4 are marked 03-A3, they are in different locations. The markings on the 03-A4 are offset so that they aren't under the scope base.
"...a real 03A4?..." There's a known S/N range. Between serial numbers 3407088 and 4998320 is real. And Remington made in 1943 only.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.