PDA

View Full Version : Can anyone ID a source for..


jjrothWA
02-23-2021, 07:38
taller Woodsman front sights? I need to replace existing on a third series Huntsman. [by 0,070" taller]??
lyman
02-23-2021, 08:11
hate to send you elsewhere, but the same question on Colt Forum or Rimfire Central may get a quick answer
Sunray
02-27-2021, 11:39
You mean a .070" blade or 70 thou taller? 70 thou taller than what?
Dunno if this'll help. 1/10", 1/8" and .385".
https://www.gunpartscorp.com/gun-manufacturer/colt/auto-pistols-colt/woodsman-spt-tgt
jjrothWA
02-27-2021, 07:54
Need to add 0.70 to existing blase.

It the Huntsman of the final series of Woodsman.

Numrich has blades for the Second Series that were pinned to the barrel ramp. Mine is single blade that is eitheer press fit into the top of barrel or silversoldered to the barrel/
Sunray
03-03-2021, 11:30
Their site shows different sight blades. Adding 70 thou could be done by welding/silver soldering a bit of brass on top of the existing blade and filing. Assumes you can see it and have some tools.
lyman
03-03-2021, 11:35
Their site shows different sight blades. Adding 70 thou could be done by welding/silver soldering a bit of brass on top of the existing blade and filing. Assumes you can see it and have some tools.

JB weld may hold as well,
jjrothWA
03-04-2021, 07:51
Not for long, with the JB weld.

Talking with the gunsmith.