PDA

View Full Version : MEC 650


JOHN COOK
02-26-2021, 12:29
I took out my MEC 650 to show a friend who is going to purchase same. Apparently when I stored it I bent the primer feed tube. I have had this item for about 30 years. Still works as good as the day I purchased. I was going to order the tube but I see it has been replaced by a primer tray feed device. It appears that it is designed to replace the tube. Wondering if it will work in my unit.Appreciate any information. Will purchase the tray if it functions in my ancient MEC.

John in SC
Sunray
03-06-2021, 10:23
The 650 appears to be discontinued. However, here's a place to talk to.
https://www.mecoutdoors.com/contact-us
How badly is it bent? It fixable?
barretcreek
03-06-2021, 10:53
Shotgun World has a forum dedicated to reloading; good source for info. Lots of diehard fans of their choice brand.
JOHN COOK
03-06-2021, 02:53
The 650 appears to be discontinued. However, here's a place to talk to.
https://www.mecoutdoors.com/contact-us
How badly is it bent? It fixable?

Not to bad, since it took a while for any response I took a 3/16 inch rod and pushed it through and tapped it a few times and it straightened out pretty good, enough so that it functions. Thanks for the web site..

John in SC