victory timing help

[satan]

hi I am seeking a longer than standard hand , pawl for a WW2 S&W K frame victory,
3 cylinder lock up 3 due not,
does anyone make a new hand or pawl /
or is there a way to stretch the pawl without breaking , the pawl as it is is case hardened,

please post

[Art]

You do have a problem. Parts for these old guns can be extremely hard to get. You might check with Gun Parts (Numrich.) There are gunsmiths that could make you a new hand are pawl but the price would probably be prohibitive.

[Allen]

Since the lockup is OK on some chambers but not others wouldn't that be caused by wear on the ratchet?

Other parts sources may be ebay or a complete kit (less frame) from gunbroker.

[Johnny P]

Don't know about S&W, but Colt hand can be stretched slightly. Grind and polish a chisel to a slightly rounded surface 1/4" or so wide. Use a smooth surface on something heavy enough not to move. Give the hand a few sharp taps with the chisel without bounce.

Have no idea if it will work on the S&W or not.

[bruce]

Jack First ... This might help ... https://jackfirstinc.com/index.php?route=product/category&path=402_453 Also post a question at S&W Forum. Sincerely. bruce.

[Allen]

Others listed too.

https://www.ebay.com/itm/312827379971?hash=item48d5f70103:g:8s8AAOSwSBNcyxq T&amdata=enc%3AAQAIAAAAwCaimvt6KPqykkqhgcQoCU1TC9y7w NMAk9qHoHbx3yab8qWL%2BvVEUcilcAi4Hj0TpNZff3NXOVb4I ki%2BgtPTSmOLrsqRNeV3rC2h6Y74cQZIUp38Ys%2FJQQvjVHw nejQkogdrZpov701mvSNAOuMxnybhB0F1IQmlfkHW6%2BmPrY8 LFcb7DSPwzoR05OHaRlPYSZzWd2cnX8xnXERexbBR%2BOVNYxI fK0%2FMnlITNgpaYQfszOETpNQikRlecQsQLdeGpw%3D%3D%7C tkp%3ABk9SR-yVw83rYg

[RCS]

About 18 years ago I called Brownell's to order a hand for my old K-38 , the gunsmith that I talked with advised me to order
the oversized hand for my K-38, which I did order. Worked out fine all these years.

I have two new S&W M&P ratchets if there is any interest ?