Printable View
Assembling a single shot 22-3000. What is the best/easiest way to produce ammunition for this caliber? Can you safely shoot modern 22 Hornet rounds with a 22-3000 chamber and single lug Krag bolt and receiver? Can I find old ammunition and break it down for case and primer and reload new rounds. Appreciate the help as I obviously do not reload much anymore.
Thanks!
Wow! Bet that .22-3000 is a hoot to shoot! Could not find anything in my books. Found a link to loaded ammo ... https://www.buffaloarms.com/22-3000-...amo223000.html and came up with these links from a google search ... https://www.google.com/search?client...UTF-8&oe=UTF-8 . HTH. Sincerely. bruce.
Hi Bruce
I just bought the barrel and haven’t received it yet. It is a 1922 M1 22 RF barrel reamed out to 22-3000 according to the stampings on the side of the barrel. It allegedly has been machined at the breech to screw into a Krag receiver. Since I have lots of those receivers and a few odd stocks laying around I bought it reasonable and thought I would give it a try. I’ll check those leads and thanks!
Mike
Isn't the .22-3000 basically a .22-.250?
I have reamers for a few 22s and smaller and then there is the 3000; for some reason it got labeled 3000 because of the speed.Quote:
Originally Posted by Fred Pillot
F. Guffey
not related to the 22-250
22-3000 Lovell
Introduced by Hervey Lovell, the .22-3000 was a successful small bore wildcat. I would lead to further wildcat developments, like the 2R Lovell(2-R Lovell, or R2 Lovell). It is formed from .25-20 Single Shot cartridges, by reducing the neck to .22”. The neck taper, shoulder and neck profile remain the same. Deviations in the case lead to more powder capacity and minor improvements in performance.
The Lovell series of cartridges were so popular that companies like Griffin & Howe carried inventory of these cartridges until the 1960’s. The .22-300 is capable of propelling a .22” dia. 45 grain bullet at 2,616 fps. with 684 ft.-lbs. of energy.
Roberson Cartridge Company is a custom manufacture of Vintage, Obsolete, Hard to Find and Wildcat calibers.
My photo shows the following cartridges:
1) WRA Co 22 WCF 2) UMC 25-20 3) G&H 22-3000 4) Peters 25-21 5) WRA 25-25 6) UMC 28-30-120
The 25-20 was used to forum the 22-3000
As Alex Hawkins wrote; "This is my story and I am sticking with it". The 3000 had to with the beginning. It was one of the first rounds that obtained 3000 fps. And there were some that said someone exaggerated the results.
F. Guffey
The Newton cartridge such as the 256 Newton and 30 Newton had velocities over 3000 fps
when introduced in 1913. Also the 22 savage Hi power / 22 Newton could both be loaded
to 3000 fps long before the 22-3000 G&H. But I do believe the 22-3000 was the most
accurate in a quality single shot rifle
photo of Newton family of cartridges:
22 Newton, 256 Newton Western load, 30 newton western load, 35 Newton Western load,
33 Newton and 400 NewtonAttachment 49229
There were two .25-20 cartridges, the .25-20 Single Shot, and the .25-20 WCF.