What would cause a large verticle shot string variation? Right-to-left is holding within an inch or 1 & 1/2 inches but up and down varies about a foot. This is using an M1 w/ CMP Greek M2 ball at 100 yrds using a rest. Thanks, Joe
What would cause a large verticle shot string variation? Right-to-left is holding within an inch or 1 & 1/2 inches but up and down varies about a foot. This is using an M1 w/ CMP Greek M2 ball at 100 yrds using a rest. Thanks, Joe
Last edited by Moody; 02-26-2010 at 02:23. Reason: Make the question my clear.
10. Inconsistent sight alignment.
9. Inconsistent sight picture.
8. Inconsistent placement of support
7. Inconsistent body position.
6. Poor trigger control.
5. Loose bedding.
4. Loose gas cylinder.
3. Slipping rear sight.
2. Flinching
. . . and the number one reason for poor marksmanship is . . .
1. Trying to learn without a good coach who can spot problems up-close and personal - and help fix them.
Ammo
Cheers,
Mark
"I strive to consistently shoot to the level of accuracy that I only occasionally achieve" - Mark
Alea Iacta Est
Try a dozen cold barrel shots. That should narrow down the possibilities considerably.
regards, dennis