Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Join Date
    Sep 2009
    Location
    Pacific North west & Lake Havasu City, AZ.
    Posts
    993

    Default National Postal Meter

    Just picked up a NPM carbine and it has a Marlin barrel. Did they put these barrels on some NPM carbines from the factory?

  2. #2

    Default

    FWIW - My National Postal Meter M-1 carbine has a Marlin barrel. The carbine is a post-war rebuild with a Springfield Armory M-2 stock and lots of later parts, but, the barrel appears to be the original.

    BluSky4.JPGBluSky1.JPG
    Last edited by butlersrangers; 09-02-2018 at 12:26.

  3. #3
    Join Date
    Sep 2009
    Location
    Pacific North west & Lake Havasu City, AZ.
    Posts
    993

    Default

    Thanks for your response. This may confirm originality or the possibility that one of the rebuild depots used Marlin barrels to replace warn or ruined original ones. Is Tuna out there?

  4. #4
    Join Date
    Oct 2009
    Location
    North Carolina
    Posts
    280

    Default

    If it is a late NPM, something in the 4 million range, the Marlin barrel likely is original to that receiver.

  5. #5

    Default

    Mike is right it's most likely original to the receiver. NPM used over 68,000 Marlin barrels in 1944. The carbine has been updated as Mike said and it's a Blue Sky import from Korea. Give or take a bit about March 1944 for when it was made.

  6. #6

    Default

    OP gave no serial number or detail on his NPM carbine.

    The 'Blue Sky' NPM is mine. No intent to hijack D. Hansen's thread. I posted pictures to show 'finish match' of barrel and action, which leads me to believe my 'Blue Sky' has its original barrel, (which is marked Marlin).
    Last edited by butlersrangers; 09-02-2018 at 11:51.

  7. #7

    Default

    No he didn't and I took the serial number from the picture. The rest still stands. Now without knowing the serial number of his carbine then one cannot say it has an original barrel on it.

  8. #8

    Default

    Tuna - Thanks for the information on the Marlin barrels in 1944!

  9. Default

    What other Carbine manufacturers used Marlin barrels besides NPM?

  10. #10

    Default

    When barrels were in tight supply and that was most of the time, they were shipped to who ever needed them but in general Marlin barrels were not considered to be the best. Same as Buffalo Arms. They had problems with them But they were used when they had to be.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •