Results 1 to 3 of 3

Thread: what are your pet loads for 38 Special?

  1. #1
    Join Date
    Sep 2009
    Location
    Dallas, TX metro.. formerly Phoenix metro, AZ
    Posts
    2,209

    Default what are your pet loads for 38 Special?

    Standard Loads?
    + P Loads?

  2. #2
    Join Date
    Sep 2009
    Location
    Georgia
    Posts
    3,738

    Default

    My one do it all .38 Special load is one I took note of from Skeeter Skelton. It is any kind of .38 brass primed with any decent domestic SP primer, loaded with 5.0 grains of Unique pistol powder and topped off with a 158 - 160 grain cast lead semi-wadcutter flat nosed bullet. This one load has for me proven ideal for all my .38 and .357 revolvers. If I anticipate the need for more power, then I load up some .357 Magnums. For the overwhelming vast majority of shooting, this full power service level load has been more than sufficient. Sincerely. bruce.
    " Unlike most conservatives, libs have no problem exploiting dead children and dancing on their graves."

  3. #3

    Default

    I?ve used these loads:

    IMG_0546.jpg

    They work well for me!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •