Gun Safe Lockout

[Pete Davis]

Safe is a Cannon American Eagle purchased 2003.

Keypad functions, recognizes code but solenoid fails to kick open the lugs.

Have tried lithium battery, pounding on the door and all the other recommended fixes.

Called Cannon and got someone in the p'pines.

About to call a locksmith who can drill.

Any experience here?

PD

[barretcreek]

One more thing to fear from the Nork's EMP. Not being familiar with one my thought is you are going to have to access the camming mechanism by trashing the dial/keypad part.

[Pete Davis]

No doubt. Always was a tad leery of the keypad lock. 13 years is a good service life I reckon. I will replace with a dial unit, assuming I can ever get back in there.

PD

[barretcreek]

Get a case of beer and invite some friends to bring a crowbar. A good angle grinder with several cutoff blades and you could peel the top or bottom off without serious damage to the Purdey.

[JB White]

What did Cannon tell you? If they told you "sorry, you're SOL" and left you hanging...screw that outfit.
They should have at least offered some sort of help or options.

[Mike Josephic]

Call a professional. They will know how to get into that lock without destroying your safe in the process.
There should not be a need to drill, cut into the safe or any of that nonsense.
Google your local area to find a good locksmith that specializes in safes.

They will also likely tell you (if they are honest) that digital keypads are more trouble than they are worth.

[Pete Davis]

Cannon operator kept telling me to change the battery. They said that if all the fixes I mentioned were ineffective, thast Cannon would arrange a drill-out in the #4-500range. That's it.

PD

[leftyo]

i learned a few years back. had a browning safe that the solenoid failed in. i cut the safe open as it wasnt worth the money to have a locksmith drill it out and then repair it. not that a mechanical dial lock cant fail, but very rare.

[jmm03]

Pete, I watched a youtube video by I believe "Mr. Locksmith" or something similar where he used a strong rare earth magnet and opened the safe in about 30 seconds flat. He put the magnet at around the 11 oclock position relative to the dial and it activated the lock mechanism solenoid. Worth a look. Good luck. Jim

[Sunray]

Doesn't take or require a lock smith. You can drill the thing yourself with any hand drill.
Rare Earth magnets can be had from Lee Valley Tools, as I recall. 1/2" x 1/8" runs $1.60.

[Jim in Salt Lake]

+1 on calling a locksmith. The guy we use for our range locks and member keys says those electronic locks are his job security! I had asked him if I could change my dial lock to electronic and that was his answer. He can get them open, maybe he uses the rare earth magnet process from jmm03. He can also replace them with mechanical. I'm sure these aren't rare skills and you can find them near you. Even if the safe is 13 years old, I'd fix what you have and not destroy it and buy another. It can be a pain moving those things. A buddy of mine is moving to Idaho and we just moved his three safes down a bunch of stairs into his garage. PITA.

[Pete Davis]

Thanks guys. On the trail of a locksmith now. No plan to damage my safe. PD

[S.A. Boggs]

After reading all the comments I have decided against purchasing an electronic safe for the Lair, looking at other options...open to any suggestions to secure my long "friends". Thought of buying an 18 weapon Stack On gun cabinet and enclosing it with a hidden type door.
Sam

[jmm03]

Pete, this was the video. https://www.youtube.com/watch?v=ApJQ2wcYjBo

[bonnie]

What others have said. A commercial safe company locksmith told me many years ago electric keypads were good for business. He had just retuned from a supermarket that couldn't get it's electric safe lock to work and could not open for business for several hours until he was finally called.