Remove and replace trigger

[bobgar]

Hello

Does anyone have instructions on remove and replace trigger assembly to a Krag? That little spring on the sear seems like it can cause problems.

[k arga]

remove- lift trigger out of rec and tap sear out install- start sear in its round slot, I made a metal wedge to compress the spring and then tapped the sear in with wedge. a lot easier than it sounds.

[Kragrifle]

A little tip-position the spring so that the sharp edge is looking at you so that when you pry it in place it slips in rather than is facing down then hangs up on the edge of the receiver.