Interesting sling, at least to me

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rayg
    Senior Member
    • Aug 2009
    • 7444

    #1

    Interesting sling, at least to me

    I always thought that the "C" tipped slings in OD-3 were all WWII period and the solid tips in OD-7 post war. However here's a minty "C" tip sling with a 1948 date. Does anyone know the date they changed to the solid tips and who the manufacturer of this sling is? Maybe the manufacturer's using up their stock of "C" tips before switching to the solid tips, Ray
    Attached Files
    Last edited by rayg; 06-11-2014, 08:03.
  • Gary D. Funderburg
    Advanced Member
    • Sep 2009
    • 47

    #2
    Schlagel Manufacturing, I believe 1943 not 48. I have seen many of them.
    Last edited by Gary D. Funderburg; 06-11-2014, 08:20. Reason: added

    Comment

    • Rock
      Senior Member
      • Aug 2009
      • 558

      #3
      Photo looks like 1944 to me.

      Comment

      • rayg
        Senior Member
        • Aug 2009
        • 7444

        #4
        I had the sling for a long time and always assumed it was a three until just I happened to take a close look at it and it sure looks like a an eight (8) in person. But looking at it in the last photo it does look like a bad stamped "4" Here's another photo, and if you enlarge it and also the first post photo they look like "8's though. Ray
        Attached Files
        Last edited by rayg; 06-11-2014, 01:32.

        Comment

        • Tuna
          Senior Member
          • Aug 2009
          • 2686

          #5
          The switch over to the D tip was later in 1944. But I think Gary is correct in it is a bad stamped 1943 as the ink appears to have run some.

          Comment

          • emmagee1917
            Senior Member
            • Sep 2009
            • 1492

            #6
            Why were " C " tips slings ever even made ? The very similar Reising sling was around in early '42 ( if not before ) and it always had "D" tips.
            Chris

            Comment

            • jimb
              Senior Member
              • Jan 2010
              • 375

              #7
              The steel on the C-tip is much thinner and it saved steel. Unfortunately, they found that it didn't hold up as well so they later changed to the D-tip. BTW the D-tip was used for repair of slings where the C-tip was lost.

              Comment

              • Tuna
                Senior Member
                • Aug 2009
                • 2686

                #8
                And as Jim said it was thinner and as such it was easier to get around the oiler used on the carbine.

                Comment

                Working...