New Barrel Break in Recomdations

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Jonn
    Junior Member
    • Jan 2018
    • 6

    #1

    New Barrel Break in Recomdations

    Gentlemen';
    I am requesting your recommendations to break in a new 1963 SA
    National Match Barrel. Thank you for any advice.

    Respectfully';

    jonn "Bay of Pigs Yacht Club Member".
  • p246
    Senior Member
    • Mar 2013
    • 2216

    #2
    Opinions will vary, I punch the bore every shot for 10, punch after 5 for three sets then I run them till they are burnt out. Mine are bolt guns with Bartlein or proof research (Standard not lined) tubes. Good luck.

    Comment

    • togor
      Banned
      • Nov 2009
      • 17610

      #3
      What p246 suggests gets at the basic idea, which is to get any left over burrs (from cutting the rifling) out of the bore early in the game. Shooting knocks them loose, cleaning gets them out with the copper.

      Comment

      Working...