S-1A bolt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • the_1st_sgt
    Member
    • Sep 2009
    • 88

    #1

    S-1A bolt

    S-1A bolt.jpg

    Some time back I posted about this S-1A <> bolt. Trying to post a photo and I hope it works. Any comments about this anomaly would be appreciated
  • RCS
    Senior Member
    • Aug 2009
    • 2180

    #2
    I have an original rifle in th 2,77 million serial number range with a rev 12 bolt heat lot S-A1 <>


    also found data on 2466215, 2720806, 2801017 all with rev 12 bolts heat lot S-A1<>

    Comment

    • the_1st_sgt
      Member
      • Sep 2009
      • 88

      #3
      This one is an S-1A which threw me. I've seen many S-A1's. I guess when SA set up the dies it must have been Monday morning

      Comment

      • RCS
        Senior Member
        • Aug 2009
        • 2180

        #4
        I have a list of revision 12 bolts:

        S-1
        S-1A
        S-2
        S-3
        S-4
        S-4<>
        S-5
        S-6A<>
        S-7
        S-8
        S-9
        S-10A

        there is more

        Comment

        • the_1st_sgt
          Member
          • Sep 2009
          • 88

          #5
          RCS, thank you
          This is the first one I've seen and have seen plenty of S-A1's. Do you have info as to what time frame these (S-1A) were used? This came on a rifle I bought a few months ago from a friend. The rifle itself MAY be a lend lease 721418. He had taken off the original parts and replaced them with newer ones and turned it into his "blaster". After I bought the rifle he gave me all of the parts, and stock, that he had removed

          Comment

          • RCS
            Senior Member
            • Aug 2009
            • 2180

            #6
            Difficult to pin point, SA serial number 883325 shows a rev 12 bolt heat S-11<>

            most early rev 12 bolts are RE5B, W9B, RE6B, A9W. A8W, there are more !

            People could and did change bolts

            Comment

            • the_1st_sgt
              Member
              • Sep 2009
              • 88

              #7
              Thank you

              Comment

              Working...