unusual M1 rifle receiver

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RCS
    Senior Member
    • Aug 2009
    • 2180

    #1

    unusual M1 rifle receiver

    This receiver is in excellent condition and came from Rock Island Arsenal with
    the original SA 4-43 dated barrel also in excellent. What is unusual is the
    machining pattern on the rear tang. I did read in an older GCA Journal that
    in early 1943, some receivers had the firing pin pocket cut too deep and were
    reworked. Don't know if this was among that group, it sure is not common.p1010043_0052.jpgp1010041_0050.jpgp1010045_0054.jpgp1010042_0051.jpg
  • bruce
    Senior Member
    • Sep 2009
    • 3759

    #2
    Up front ... I plead ignorance! I know the small imperfection on the right side of the receiver is not normal. Does the rework consist of the small cut on the inside rear of the receiver? Sincerely. bruce.
    " Unlike most conservatives, libs have no problem exploiting dead children and dancing on their graves."

    Comment

    • RCS
      Senior Member
      • Aug 2009
      • 2180

      #3
      Not really certain, i talked to an advance M1 collector a few years ago and showed these
      photos, he said in all the years of looking at m1 rifles, he has only seen one other ! I
      should have this x-rayed maybe an answer ?

      Comment

      • RCS
        Senior Member
        • Aug 2009
        • 2180

        #4
        additional photos of same receiver

        here are additional photos of the above receiver with SA 4-43 barrelP1010026_0024.jpgP1010025_0023.jpgP1010028_0026.jpgP1010038_0034.jpg

        Comment

        Working...