Long Range plinking

[Fred]

Wow! Thanks Steve!
Id like to see a picture or pictures of that Belding and Mull!

[Pete Davis]

A few years ago I made up a M1903 scoped unit from a rifle that had been drilled and tapped, into the right wood and put a Lyman AK on it. It's an April of 1918. Really accurate.

SA 4-18 Resize Walnut Log.jpg

SA 4-18 Target Resize.jpg

Flaming Zweebie-RIA 1919 033.jpg

[Fred]

Pete, I'll bet you built that stone building in the background. Pretty neat!

[bnrg]

Pete, if that is the serial no of your rifle on the target I have its sibling, 905xxx. It is no longer stock condition-SA 42 barrel and dt for a lyman 48 and is fitted with a damond traistor (sp?) trigger. It was my starting out high power competition rifle for a long time. My club team mates rolled their eyes when i showed up with a ‘relic’ but I pointed out that ‘it has a new barrel!’-they werent impressed. It shoots pretty well tho I am going to need a scope soon to hold up my end.
Bob

[bnrg]

Cplnorton, does the rear part of the knoble just drop down onto the rear reciever bridge or is there a clamp of some sort? There was a Van Wie mount similar to this one shown in Brophys book-the long bar part that spans the magazine was bent down slightly and acted as a spring to lock it in place. Brophy made no comment on how well it (or knoble) worked in practice.

[bnrg]

Fred and Pete, any problems with the high mount and cheek position on the stock? With full power loads it looks like it might be painful to shoot?

[cplnorton]

Cplnorton, does the rear part of the knoble just drop down onto the rear reciever bridge or is there a clamp of some sort? There was a Van Wie mount similar to this one shown in Brophys book-the long bar part that spans the magazine was bent down slightly and acted as a spring to lock it in place. Brophy made no comment on how well it (or knoble) worked in practice.

Andrew found a 1923 Sniper rifle trials, and it has several very detailed pics of the mount. It looks like it is made from spring steel, and it's normally curved. So you put it in rear Sight base, and then it would be putting pressure on the rear to keep it in place.

It's a really very simple, but ingenious design.

Credit goes to Andrew for this one. This is from a report he found.

[Fred]

Fred and Pete, any problems with the high mount and cheek position on the stock? With full power loads it looks like it might be painful to shoot?

No problems. I brace the rifle against my shoulder as usual and take my shot. My jaw, though positioned higher up on the stock, feels just fine.

- - - Updated - - -

- - - Updated - - -

Andrew found a 1923 Sniper rifle trials, and it has several very detailed pics of the mount. It looks like it is made from spring steel, and it's normally curved. So you put it in rear Sight base, and then it would be putting pressure on the rear to keep it in place.

It's a really very simple, but ingenious design.

Credit goes to Andrew for this one. This is from a report he found.

That is a Neat mount!

[Fred]

A few years ago I made up a M1903 scoped unit from a rifle that had been drilled and tapped, into the right wood and put a Lyman AK on it. It's an April of 1918. Really accurate.

[ATTACH=CONFIG]43428[/ATTACH]

[ATTACH=CONFIG]43429[/ATTACH]

[ATTACH=CONFIG]43430[/ATTACH]

Pete, I'll bet that rifle is fun to shoot.

[Pete Davis]

No real problems shooting it. I like the Lyman AK. The straight stock feels good to me. I have a scoped "C" rifle and a scant A4 as well. They all shoot well. When I was 46 I killed a deer at 80 yards with the issue sights from a 1918 RIA. Nowadays (58) a scope is indicated.

PD

[Marine A5 Sniper Rifle]

No real problems shooting it. I like the Lyman AK. The straight stock feels good to me. I have a scoped "C" rifle and a scant A4 as well. They all shoot well. When I was 46 I killed a deer at 80 yards with the issue sights from a 1918 RIA. Nowadays (58) a scope is indicated.

PD

The Armory still looks like a work of art. Any new projects?

[Pete Davis]

Jt

11-17



[ATTACH=CONFIG]43473[/ATTACH]

pd

[Marine A5 Sniper Rifle]

As Gorgeous would say, "Do you consider yourself an artist or a craftsman"?

Nice pick on that keystone.

[Fred]

Nicely done!

[Marine A5 Sniper Rifle]

Pete's skill with stone is legendary.