Serial Number 215787

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mark Daiute
    Senior Member
    • Aug 2009
    • 654

    #1

    Serial Number 215787

    1903 Springfield Serial Number 215787. what year would this rifle have been manufactured? Any other info, of course, would be greatly appreciated.

    Thanks,

    Mark
    "A man with a tractor and a chain saw has no excuses, nor does he need any"
    Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.
  • Rick the Librarian
    Super Moderator
    • Aug 2009
    • 6700

    #2
    If your rifle is a Springfield Model 1903, about 1906 for a serialization date; if a Rock Island about 1911 or 1912. It may have started out chambered in 30-03.

    If you can procide further information or pictures, we can help you further. Start by listing the barrel manufacturer and date, stock type and markings, etc.
    "We make men without chests and expect from them virtue and enterprise. We laugh at honor and are shocked to find traitors in our midst."
    --C.S. Lewis

    Comment

    • Mark Daiute
      Senior Member
      • Aug 2009
      • 654

      #3
      Originally posted by Rick the Librarian
      If your rifle is a Springfield Model 1903, about 1906 for a serialization date; if a Rock Island about 1911 or 1912. It may have started out chambered in 30-03.

      If you can procide further information or pictures, we can help you further. Start by listing the barrel manufacturer and date, stock type and markings, etc.
      sorry, no pictures the rifle is not (yet) in my possession. This is a Springfield rifle, not Rock Island Arsenal Rifle and it has an Avis barrel dated 11-18. I've been following this rifle for some time now and have been waiting for finances to come in line with the asking price.

      Most of the bluing is gone, there are hints of the cartouche and the circled-P. The bolt is not original to the rifle (an educated friend advised me on that detail). I simply like the rifle. The bore is perfect/like new.

      I may put some money down on the rifle.

      Thanks,

      Mark

      Thanks!
      "A man with a tractor and a chain saw has no excuses, nor does he need any"
      Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.

      Comment

      • Art
        Senior Member, Deceased
        • Dec 2009
        • 9256

        #4
        The rifle was rebuilt at least once and the smart money would be on at least twice. Apparently from the amount of wear it wasn't withdrawn and put into reserve so it's a bit surprising the rifle didn't wind up being broken down for parts and having its receiver scrapped sometime in the 1920s or '30s. Does it have a "Hatcher Hole?"
        Last edited by Art; 03-24-2013, 10:02.

        Comment

        • Mark Daiute
          Senior Member
          • Aug 2009
          • 654

          #5
          I'm quite sure the Hatcher hole was there. Would it have been on the right side and not the left side as well? I remember seeing it on the right hand side....
          "A man with a tractor and a chain saw has no excuses, nor does he need any"
          Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.

          Comment

          • Art
            Senior Member, Deceased
            • Dec 2009
            • 9256

            #6
            Originally posted by Mark Daiute
            I'm quite sure the Hatcher hole was there. Would it have been on the right side and not the left side as well? I remember seeing it on the right hand side....
            M1903 rifles originally had a small and pretty much useless gas escape hole on the right side of the receiver. Later, during overhaul, especially if USMC rifles, many had a large gas escape hole (Hatcher Hole) drilled on the left side of the receiver. This was a much better place for it.

            Comment

            • Art
              Senior Member, Deceased
              • Dec 2009
              • 9256

              #7
              Originally posted by Mark Daiute
              I'm quite sure the Hatcher hole was there. Would it have been on the right side and not the left side as well? I remember seeing it on the right hand side....
              M1903 rifles originally had a small and pretty much useless gas escape hole on the right side of the receiver. Later, during overhaul, especially if USMC rifles, many had a large gas escape hole (Hatcher Hole) drilled on the left side of the receiver. This was a much better place for it.

              Sorry for the duplicate. CSP and my "Magic Machine" aren't getting along today.
              Last edited by Art; 03-24-2013, 10:49.

              Comment

              • Mark Daiute
                Senior Member
                • Aug 2009
                • 654

                #8
                HONESTLY CANT' REMEMBER AND I SHOULD'VE LOOKED FOR IT.

                My machine is in the same boat with CSP today

                Good input. Thanks,

                Mark
                Last edited by Mark Daiute; 03-24-2013, 11:26.
                "A man with a tractor and a chain saw has no excuses, nor does he need any"
                Me. "Consistency is the hobgoblin of little minds" Emerson "Consistency is the darling of those that stack wood or cast bullets" Me.

                Comment

                Working...