SPL Stock Cartouche

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jgrabow6493
    Member
    • Aug 2009
    • 30

    #1

    SPL Stock Cartouche

    Looking for info for a 1918 Springfield 1903 with a SPL cartouche on the left side of the stock. Do any of you possibly have any information on this cartouche?
  • RCS
    Senior Member
    • Aug 2009
    • 2180

    #2
    SPL stamp

    Contact Rick Borecky (he does stock repairs) as he sent me a photo of the SPL stamp
    that he found on a stock

    here is his photodscn3228.jpg

    Comment

    • clintonhater
      Senior Member
      • Nov 2015
      • 5220

      #3
      Can' t find this mark in either Brophy's or Campbell's lists of inspectors, but I suspect Mr. Beard can identify it. By the way, Brophy's dates for "DAL," a commonly encountered post-WWI mark, are seriously at variance with Campbell's!

      The dies for making fake inspectors marks have been around for quite some time, but it would make no sense to fake the little known inspectors marks.

      Comment

      • Promo
        Senior Member
        • Jun 2011
        • 335

        #4
        I have SPL in my inspectors list listed as unknown inspector, but on M1903 rifles only from the 1917 to 1920 period.

        Edit: maybe it was Stanley P. Gibbs (later "SA" over "SPG" stamp, especially found on NM rifles) prior to marriage ... .
        Last edited by Promo; 05-25-2020, 01:39.

        Comment

        • RCS
          Senior Member
          • Aug 2009
          • 2180

          #5
          When I first posted the SPL stamp on this forum awhile ago, I received two replies concerning
          rifles that had this cartouche.

          first was SA 1036724 barrel SA 11-18 Mark 1, stock was also Mark 1 with the SPL

          second was SA in the 1.08 mil range with SPL cartouched stock

          Comment

          • jgrabow6493
            Member
            • Aug 2009
            • 30

            #6
            Thanks for the replies.

            Comment

            Working...