03 clip loading problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Fred
    Senior Member
    • Sep 2009
    • 4977

    #16
    My mistake. Obviously I meant to convey that I use the stripper clips originally made for the 6.5x55 SWEEDISH Mauser. Thanks Parashooter!

    Comment

    • SemperFi, 0321
      Member
      • Jan 2014
      • 35

      #17
      Swiss stripper clips?

      As a person of Swiss descent, and citizenship (I got grandfathered in thru my mother, think about that for a minute), I'm appalled at the lack of knowledge from most folks.
      When I tell people I'm Swiss, they reply right back "I didn't know you're Swedish", but the best one is how they use the Swiss flag on first aid kits.
      The Red Cross is OPPOSITE of the Swiss flag, not the same!
      Red Cross= First Aid
      White Cross=Schweiz/Switzerland/Suisse

      Comment

      • 6thMARDIV
        Senior Member
        • Oct 2011
        • 218

        #18
        I'm using the same as Fred, I've shot several hundred rounds, both live and blank with no problems.

        Comment

        • Roadkingtrax
          Senior Member
          • Feb 2010
          • 7835

          #19
          It's not the end of the world.
          "The first gun that was fired at Fort Sumter sounded the death-knell of slavery. They who fired it were the greatest practical abolitionists this nation has produced." ~BG D. Ullman

          Comment

          • Darreld Walton
            Senior Member
            • Sep 2009
            • 632

            #20
            Again, pony up a few bucks for the stainless Champ's. Work good, last a long time, won't rust, bust, nor collect dust!!!!!

            BTW, I HAVE, on occasion, used a Dremel to polish a good USGI clip inside with a stainless brush at medium speed. It does make a distinct improvement, or has for me, at least, but still not on a par with the commercial offerings.

            Comment

            Working...