Tweet
I have had several request recently for leather scope caps for the 03A4. Curious as to how much interest there is for these? I used to make these years ago for several collectors and reenactors, while I was stationed at MCB, Camp Pendleton, CA, but at that time, they were hand stitched.
I still have the patterns and an original sewing machine identical to one of the machine types which was used to stitch the plugs in the end of the caps. This machine is over 100 years old, but is tight and runs great. The type of stitch used was the French Edge Stitch and is sewn at an angle. If there is enough interest, I plan to begin manufacturing these to the original WWII specs. They will made from horse hide as were most of the originals, with NOS (new old stock) thread from the 1950's.
Another project we are working on, is setting up to make the leather cheekpiece for the M1D/C. I recently acquired one of the original molds and cutting dies. It has been documented that the tooling we have was made in the late 1950's. The tooling needed to be reworked and some TLC to get them back in shape, but we should be able to make a short run in the near future.
If there is any interest in the scope caps among 03A4 shooters and collectors here at CSP, just let me know as jigs will have to be made to form and sew the caps correctly. Your thoughts and input would be greatly appreciated.
Semper Fi,
Richard
I still have the patterns and an original sewing machine identical to one of the machine types which was used to stitch the plugs in the end of the caps. This machine is over 100 years old, but is tight and runs great. The type of stitch used was the French Edge Stitch and is sewn at an angle. If there is enough interest, I plan to begin manufacturing these to the original WWII specs. They will made from horse hide as were most of the originals, with NOS (new old stock) thread from the 1950's.
Another project we are working on, is setting up to make the leather cheekpiece for the M1D/C. I recently acquired one of the original molds and cutting dies. It has been documented that the tooling we have was made in the late 1950's. The tooling needed to be reworked and some TLC to get them back in shape, but we should be able to make a short run in the near future.
If there is any interest in the scope caps among 03A4 shooters and collectors here at CSP, just let me know as jigs will have to be made to form and sew the caps correctly. Your thoughts and input would be greatly appreciated.
Semper Fi,
Richard
Comment