Where to get Spgfld worked on?

[cowboybart]

I am wanting to get a take off barrel put on my 03 action. The barrel headspaces at about 3 o'clock. If I back it out to index the sight, headspace is too long. While I feel confident in fixing this with a Mauser, I am not confident,with square thread and an extractor notch. If I must, I will send it to a place that builds hot rod 700's, wait 17 months, and get it back butchered because they are not familiar with the 03. I would rather send it to a no-name 'smith that can correct the issue w/o me paying for his annual advertising budget, and putting both his kids thru college.
Can anybody provide contact info for a 'smith that can do this?

[bruce]

Contact Chuckindenver at molinenorski@msn.com

[chuckindenver]

not sure id say im a no name smith..

[IditarodJoe]

Chuck is really good. Not sure if what you want done is feasible, but Chuck is the one who would know.

[cowboybart]

No offense Chuck, by no-name I mean somebody who isn't backed up 3 years, and somebody who doesn't advertise in magazines or have a "reality" TV show!

[chuckindenver]

they get backed up... cuz they lazy and dont want to work on what they have sitting...
i turn out alot of work,.. and get it done in a timely manner... i like to get paid..so...i work

[Punch the Clown]

Go by the front sight. The rear sight is possibly installed improperly. If that's the case it is possibly repairable.The other possibility of course is the receiver.

[11mm]

they get backed up... cuz they lazy and dont want to work on what they have sitting...
i turn out alot of work,.. and get it done in a timely manner... i like to get paid..so...i work

Chuck gets my vote, and he does turn stuff around in a timely manner...with quality...in my opinion.

[PhillipM]

Chuck can refinish it and make it look new.

[LeagleEagle]

Ditto for Chuck. He's done a couple of '03 barrel swaps for me, great job.