Longitudinal play of the uncocked bolt

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • fguffey
    Senior Member
    • May 2012
    • 684

    #16
    Originally posted by Randy A
    FC-Fan,
    This thread has got some "bad" information in it, I sent you a pm.
    I checked, I will guess the PM will arrive in the AM.

    It does not matter is it is a head space gage that is called go-gage or no go-gage or the field reject length gage. I am the fan of standards and transfers.
    And then there is modifying a go-gage to measure fron go to infinity or a more practicle .016" longer than a minimum length case.

    F. Guffey

    Comment

    • Randy A
      Senior Member
      • Mar 2010
      • 615

      #17
      Originally posted by fguffey
      I checked, I will guess the PM will arrive in the AM.



      And then there is modifying a go-gage to measure fron go to infinity or a more practicle .016" longer than a minimum length case.

      F. Guffey
      PM was addressed and sent to FC-Fan... the OP

      Comment

      • fguffey
        Senior Member
        • May 2012
        • 684

        #18
        PM was addressed and sent to FC-Fan... the OP
        And then there is modifying a go-gage to measure from go to infinity or a more practical .016" longer than a minimum length case.
        Randy, I did not receiver your PM in the AM and I will have to assume there is something you do not understand about using one gage to measure the length of a chamber. That would be one gage to measure the length of a chamber from go-gage length to infinity; or as I said a chamber that is .016” longer than a minimum length/full length case. That would be .011” longer than a go-gage length chamber + .002”.

        I can understand you wanting to argue if you do not understand what is being done and or said. One gage that has the ability to measure the length of the chamber in thousandths in 16 different lengths has more utility to me than 3 gages with 3 fixed lengths.

        Go or no go, or as they said in the old days go and not go.

        F. Guffey
        Last edited by fguffey; 05-21-2016, 08:53. Reason: add a space between 3 and g

        Comment

        • Randy A
          Senior Member
          • Mar 2010
          • 615

          #19
          fguffy,
          I think you're misunderstanding the posting process, I "am not" sending you a pm. When a post addresses a specific member (in this case FC-Fan) that means I'm sending FC-Fan a PM and it has nothing to do with the previous post. Just because it came after your post does not mean I am sending you a PM.

          Comment

          • fguffey
            Senior Member
            • May 2012
            • 684

            #20
            FC-Fan,
            This thread has got some "bad" information in it, I sent you a pm.
            That is what it was; bad timing; ME? I would have sent the PM without the fan fair.

            F. Guffey

            Comment

            Working...