Going price on M1917?

[P51MUSTANG]

What is the current going price on an import M1917 with mixed parts? Just looking to know how much a decent shooter would be. TIA...

[p246]

Sold six last year. One with shot out bore brought $350. Rest went from$500 to $700.0. Nice Winnie brought the most.

[jaie5070]

Bore condition is more important unless the import marks are unsightly. Prices can be strange on Gunbroker.

[RC20]

When I sell a 1903 or a 1917, I have the gauge to tell what the ME and TE are.

Too many were fired with blanks and ate out the throat.

Look good, Muzzle looks good, throat eroded beyond Mombassa.

[Merc]

I've been seeing asking prices at gun shows for M1917s in the $600 to $900 range around here. You can improve your odds of buying a good shooter by testing headspace, ME, TE and checking bore condition but you usually have to buy the rifle before you can shoot it.

[RC20]

I've been seeing asking prices at gun shows for M1917s in the $600 to $900 range around here. You can improve your odds of buying a good shooter by testing headspace, ME, TE and checking bore condition but you usually have to buy the rifle before you can shoot it.

While I am only casually shopping mine, they all shoot decent, have good TE and MW and are in overall good condition.

Some cleaner than others, stocks vary as well.

All are parts mixed.

Eddystone is up for $900. I may not get it but its solid and a very clean good bore.

Others in the $1499 range with clean receiver and barrel, good bores and non issued stocks.

You can get a bargain once in a while, but for the most part the low cost good conditions ones are gone.

[Merc]

While I am only casually shopping mine, they all shoot decent, have good TE and MW and are in overall good condition.

Some cleaner than others, stocks vary as well.

All are parts mixed.

Eddystone is up for $900. I may not get it but its solid and a very clean good bore.

Others in the $1499 range with clean receiver and barrel, good bores and non issued stocks.

You can get a bargain once in a while, but for the most part the low cost good conditions ones are gone.

I'd probably ask similar money for my low serial numbered excellent shooting W if I ever lost my mind and decided to sell it. Lots of reasonably priced NOS parts are available on the Internet if a buyer decides to replace the worn or poor fitting mixmaster parts.

[p246]

I kept my Eddystone that shoots lights out. One of the kids will get it when I take a dirt nap. Same with the Eddystone P14.

[Merc]

I kept my Eddystone that shoots lights out. One of the kids will get it when I take a dirt nap. Same with the Eddystone P14.

So, your E P14 is as accurate shooting the .303 as your E M1917 is shooting the slightly hotter 30-06? I'd have to say my Enfield No. 4 Mk 1* shoots the .303 every bit as accurately as my W M1917 shoots the 30-06.

[dokcop]

1917 value

While I am only casually shopping mine, they all shoot decent, have good TE and MW and are in overall good condition.

Some cleaner than others, stocks vary as well.

All are parts mixed.

Eddystone is up for $900. I may not get it but its solid and a very clean good bore.

Others in the $1499 range with clean receiver and barrel, good bores and non issued stocks.

You can get a bargain once in a while, but for the most part the low cost good conditions ones are gone.

HI. I'm Starting to organize the sale of my 50 year '03 collection, selling off the ancillary pieces first. I have a near mint (I don't use the term lightly) 1917 Remington, bore perfect, muzzle of one (don't have a gauge to measure throat), wood near perfect except for a professionally carved "troop C" just forward of heel, all matching and all inspection marks pristine; about 95% or better bright blue remains. Nicest one I've ever seen absent the carving. Value? Thanks Dokcop

[Merc]

The most expensive minty parts-correct M1917 I’ve seen was at the Ohio Civil War Show in Mansfield, OH and had an asking price of $1575. It’s possible to turn a negative into a positive if you could research and identify the origin of Troop C. There are ways to measure throat erosion without a TE gauge and No-Go and Field headspace gauges are inexpensive. Knowing the amount of wear could enable you to ask more $.

[p246]

So, your E P14 is as accurate shooting the .303 as your E M1917 is shooting the slightly hotter 30-06? I'd have to say my Enfield No. 4 Mk 1* shoots the .303 every bit as accurately as my W M1917 shoots the 30-06.

Sorry missed this post initially. The Eddystone P14 and M1917 I kept both shoot very well. The exterior of the P14 shows a lot more wear than the M1917, but the bore was just as pristine. The P14 shoots SMK 174 grain boatails very well. It likes a max Load of 4895, actually 1/10th over SAMMI shoots the best. The M1917 will shoot the flat based 150s well, but also likes the 168 SMK. I’m using Varget in it. I had several M1917s and two P14s at one time but sold off all but the best shooters to help finance other projects. My better No. 4s shoot well but don’t like as hot a load as the P14. Different actions different loads.

[RC20]

DocKop: Phew, PM me, would like to see some pictures.

First guess is $1200.

The head space is irrelevant. If the throat is good, head space will be fine. Headpace was not an aspect for those rifles, they were not built to SAMI. They tend to run almost field reject, but that is normal as per plenty of space in a military chamber.

If you don't reload I can help you out with the TE with a low cost solution.

ps: if you do head space the striker needs to be out of the bolt, otherwise it will crush the gauge.

[Merc]

DocKop: Phew, PM me, would like to see some pictures.

First guess is $1200.

The head space is irrelevant. If the throat is good, head space will be fine. Headpace was not an aspect for those rifles, they were not built to SAMI. They tend to run almost field reject, but that is normal as per plenty of space in a military chamber.

If you don't reload I can help you out with the TE with a low cost solution.

ps: if you do head space the striker needs to be out of the bolt, otherwise it will crush the gauge.

Thanks for sharing your knowledge on headspace. Does the M1917 rule also apply to the M1903 since it came from the same era? What about the WW2 bolt action rifles ie, the 03-A3 and the Enfield No. 4 Mk 1?

[p246]

Thanks for sharing your knowledge on headspace. Does the M1917 rule also apply to the M1903 since it came from the same era? What about the WW2 bolt action rifles ie, the 03-A3 and the Enfield No. 4 Mk 1?

The LE is a different animal all together. The others are variations of The Mauser action.