Another Travesty!

[Calfed]

Last weekend I used the Persian again and scored 38/40...which was the top score. In addition to the "as issued" rifles, I was shooting in the "open class", which included Swedish M96's, Swiss K31's and 03A4's...all scoped.

[Shooter5]

Haha! For the competition, that surely must sting!

[Calfed]

Haha! For the competition, that surely must sting!

Yes, especially for the Swedish Mauser shooters. They can be insufferable about the accuracy of their rifles. Swedish Mausers are accurate...but so are the Persians.

I picked up the Argentine and a few others yesterday from my FFL (that damned 10 day "cooling off" period). I'll post additional pictures of it.

[Calfed]

I picked up my new Argentine drilled an tapped rifle the other day from my FFL. It is in outstanding condition...both wood and metal and the bore is also outstanding.

[Shooter5]

That is outstanding, looks brand new!

[Shooter5]

If you want a nice Persian, OldGuns has one for sale:

http://www.oldguns.net/pix/smof6016.jpg

[Calfed]

Thanks, Shooter. That is a nice one. I've got several that I brought back from the dead that were not drilled and tapped.

[Shooter5]

Those turned out nice. There are another 50,000 in the Middle East you can start on next.

[Calfed]

These two started out as the $190 Samco "no blue" Persians. It appears that someone tried to use a strong cleaner on them that removed the bluing and messed up the wood finish wherever it was applied. It also seems to have hardened the cosmoline into something resembling cured asphalt. I bought three of them and still have one of them that needs "the treatment"

This was typical of the three that I got

[Calfed]

I also recently glommed this Persian Mauser.


It isn't easy to tell exactly what condition this Mauser is in. It looks to have a fair amount of cosmoline. It is supposed to arrive at my FFL this week. Better pics when it does.

Main reason I bought it...$230 shipped. Almost any 98/29 is worth that, IMHO

[Shooter5]

That is an interesting conclusion regarding the chemical stripper: many of the old rifles in Southwest Asia have the blueing stripped off including AKs. I have assumed simple steel wool was used. The reason for this is because folks in that region seem to prefer shiny guns - not blued - and a cheap and simple way to do that without plating (which is done sometimes) would be to scrub the blueing away. Maybe they used chemicals?! Most (if not all) of the Persian Mauser's seen overseas were 'shiny' (ie, blueing was stripped away) and were all well used as shooters. Conversely, the US imports mostly appear intact.
In addition, Mauser type rifles, or, Brno's as they would often be referred to (Ber-know), were still sought and used for various reasons such as presentations or hunting. The model's most preferred were the short carbines, if they could be found, or the other styles like a Vz24 length. The full-length 'musket' rifles were least preferred but acceptable if nothing else.

[Calfed]

Looking at the damaged bluing and stock finish, it looks like a chemical stripper, possibly chlorinated, was used. There did not appear to be any scratching or abrasive markings on the metal. And the damage to the stock finish looks like it was chemically caused.



I have an M49 that was lightly sporterized. The only change made was to fill in the sling cut out in the butt. Everything else looks original. I believe it was one of the short carbines made in Iran. It is an easy handling rifle and not a bad shooter, but man is it loud. 8x57 + 18" barrel = lots of decibels.

[Shooter5]

I've been looking for a Model 49. They are hard to find. How does your's shoot? (More kick and muzzle blast!) But how is the accuracy and grouping compared to the full length rifle?

[Calfed]

It shoots decently. Probably not as well as the 98/29...but I can't quantify the difference.

[Calfed]

I finally got a scope mounted on my Argentine Mauser. I ended up needing some higher rings for the scope that I mounted.

I'm hoping to get to the range next week and shoot it.