Need ID help on a Receiver Aperture Peep Sight

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jim-d
    Senior Member
    • Jul 2014
    • 150

    #1

    Need ID help on a Receiver Aperture Peep Sight

    There are some numbers (assembly codes ?), a few diamonds with numbers (inspector codes ?), H634 ( model No. ?), and what looks like a bow & arrow stamp on the slide. The sight is very similar to the old Lyman 525 over under for the Winchester target 52 or 54.
    Any thoughts.....Thanks
    Attached Files
  • artu44
    Junior Member
    • Jun 2010
    • 3

    #2
    Judging from letters on knobs it's a russian made receiver sight

    Comment

    • Liam
      Senior Member
      • Sep 2009
      • 1376

      #3
      Russian-made at Izhevsk Plant according to bow & arrow mark.
      "Wars are, of course, as a rule to be avoided; but they are far better than certain kinds of peace." - T.R.

      Comment

      • Liam
        Senior Member
        • Sep 2009
        • 1376

        #4
        The "B" should be for "вверх" which means "up," the "H" should be something like "ниже" which means "lower." the other dial I couldn't see too well, but might have a "л" for "лево" (or inverted V) which means "left," and a "п" looking character which means "право" or "right."
        Last edited by Liam; 09-28-2017, 07:13.
        "Wars are, of course, as a rule to be avoided; but they are far better than certain kinds of peace." - T.R.

        Comment

        • jim-d
          Senior Member
          • Jul 2014
          • 150

          #5
          You nailed it.....Thank You

          Comment

          Working...