Jerry can Mil. issue spout gasket.

[maverick1]

Hello, has anyone found aftermarket gasket for 5g issue jerry cans. Last look led me to a dead end.I'm looking for a donkey dick gasket for the can.

[gwp]

Amazon has round gaskets for the 5 gallon can as well as the oblong gaskets for the NATO 20 liter can.

https://www.amazon.com/GASKETS-Gallo.../dp/B01ENU2CGM

https://www.amazon.com/Jerry-Can-Gas...ZXTX0EAJTHGTQ7

[1972Doug]

Got mine off ebay

[ClintBarret]

Amazon has round gaskets for the 5 gallon can as well as the oblong gaskets for the NATO 20 liter can.

https://www.amazon.com/GASKETS-Gallo.../dp/B01ENU2CGM

https://www.amazon.com/Jerry-Can-Gas...ZXTX0EAJTHGTQ7

Hmm, I'll be taking note of these for future reference.

[dave]

Buy gasket material and make them!

[Mike]

Hi, this guy sells a lot of stuff for cans.....http://www.jagmte.com/index.php?rout...tegory&path=59 If your looking for the oblong gaskets , try here......https://deutscheoptik.com/jerry-can-...t-of-five.html Regards, Mike

[RED]

Hello, has anyone found aftermarket gasket for 5g issue jerry cans. Last look led me to a dead end.I'm looking for a donkey dick gasket for the can.

While we are on the subject, anybody know how to cement the gaskets in so you don't use them? I'm thinking of using a hot glue gun.

[leftyo]

While we are on the subject, anybody know how to cement the gaskets in so you don't use them? I'm thinking of using a hot glue gun.

if you mean so you dont lose them. hit the auto parts store and get a small tube of weatherstrip adhesive. a small amount will hold a gasket in place nicely.