Model 97 riot gun

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • JOHN COOK
    Senior Member
    • Sep 2009
    • 711

    #16
    scogt,
    There should be a date on the barrel. Under the action bar near the receiver
    . this is exactly where I'm getting the '42. If I remember correctly
    you gave me this information couple years ago. (looking through some old post)

    john
    Last edited by JOHN COOK; 08-05-2017, 12:58.
    “Then said he unto them, But now, he that hath a purse, let him take it, and likewise his scrip: and he that hath no sword, let him sell his garment, and buy one.” (Luke 22:36)

    Comment

    • schoolbd
      Member
      • Sep 2011
      • 85

      #17
      M97

      Scosgt
      Here's a photo of the date at the rear of barrel, by the way I pulled it off gunbroker as I decided not to sell, you said you weren't convinced it was legit, could explain why?IMG_1507.jpg

      Comment

      • scosgt
        Senior Member
        • Mar 2011
        • 673

        #18
        I think it has been explained above.
        As well, the stock does not appear to have the original finish (they were commercial varnish, of course it might just be the picture) and the cartouches are perfect. That is always the first clue something is not right.

        Comment

        • azimuth
          Member
          • Aug 2009
          • 36

          #19
          I own M97 Riot 941561 with U.S. and flaming bomb on the receiver, "42" between barrel and magazine, and it dates to 1942 at winchestercollector.org. The stock has been sanded at some time in the past, but I can make out a very faint boxed WB. However, I don't see any sign of an ordnance wheel below it.


          Last edited by azimuth; 04-23-2018, 03:46. Reason: added info

          Comment

          • scosgt
            Senior Member
            • Mar 2011
            • 673

            #20
            That serial puts it into the Trench gun range, but a riot is also possible at that serial.

            Comment

            Working...