.22 LR revolver

[Greyjoy]

Looking for suggestions on a good .22 revolver. Something with a 4" barrel. Thoughts?

[Emri]

Double action or single action ? What is your price range? Lots of choices, need a few specifics of what you are looking for.

[bruce]

Look around and find and buy a S&W model 18. I have been shooting S&W 17 and 18 revolvers since 1982. For the range and for the woods and fields, the model 18 is simply ideal beyond words. It is the very best .22 LR revolver ever produced by any one at any time period. Get one. You'll very much be thrilled with it. Sincerely. bruce.

[Greyjoy]

My preference would be a DA revolver. I've had a High Standard Sentinel Deluxe suggested to me. From what I can tell, the gun went out of production in the late 1960's/early 1970's. Has anyone owned one?

[gwp]

I have a High Standard Sentinal convertible in 22LR / 22 Mag. I purchased it for my Dad because he liked 22 Magnum rifles. I found it used for less than $100 and the barrel underlug reminded me of a Colt Detective Special. People would occasionally ask what I was shooting at the range. When loaded with 22 magnums the noise and muzzle flash was impressive. There is really nothing special about the Sentinal, but it is an economical plinker.

I believe the Sentinal Deluxe may have an aluminum frame. The Sentinel MK I and MK IV were the first of the series to have a steel frame.

[Allen]

Look around and find and buy a S&W model 18. I have been shooting S&W 17 and 18 revolvers since 1982. For the range and for the woods and fields, the model 18 is simply ideal beyond words. It is the very best .22 LR revolver ever produced by any one at any time period. Get one. You'll very much be thrilled with it. Sincerely. bruce.

+1

The only difference between the model 17 and 18 is the barrel length (6" and 4"). The 18 has been out of production for a while but can still be found. I have a model 17 with the 3 T's and a 917 which is a 10 shot SS. The 17 may be out of production now but the 917 is still produced. You just have to watch what variation you buy. Some are 6 shot, later ones were 10 shot, some had aluminum cylinders. The current production models have the factory safety lock so many folks choose to get a nice used one w/o the government BS. Won't be an issue if you stick with the 18 4" since it went out of production prior to the changes. With this quality comes price though. Most of the used 917's are higher than the new ones too due to the lock.

I have a S&W model 34 4" nickel too. Nice gun but what I consider a ladies pistol due to the smaller frame than the 18. I shot a carpenter bee with it one day as it was flying (hovering) using a 22lr bullet (not shot) so it's a versatile little gun too.

[lyman]

I have a High Standard Sentinal convertible in 22LR / 22 Mag. I purchased it for my Dad because he liked 22 Magnum rifles. I found it used for less than $100 and the barrel underlug reminded me of a Colt Detective Special. People would occasionally ask what I was shooting at the range. When loaded with 22 magnums the noise and muzzle flash was impressive. There is really nothing special about the Sentinal, but it is an economical plinker.

I believe the Sentinal Deluxe may have an aluminum frame. The Sentinel MK I and MK IV were the first of the series to have a steel frame.

they did offer several barrel lengths, and are generally reliable shooters,
they are relatively inexpensive,

I have one, and have had 0 issues with it,

and +1 to the Smith revolvers, I have a 17-4 (6") that is fantastic,

18's 17's and 617's are all available in 4 " barrels,

if you like a smaller size, look for a model 34, they are based on the J frame

[Johnny P]

My preference would be a DA revolver. I've had a High Standard Sentinel Deluxe suggested to me. From what I can tell, the gun went out of production in the late 1960's/early 1970's. Has anyone owned one?

My dad bought me one when I was about 12 years old (haven't times changed) and it has been a rugged excellent shooter. Like the earlier Colt revolvers, the cylinder locks up on the hand leaving no slack in the cylinder when it fires. Local gun shop has one that looks almost new.

Don't know what you want the revolver for, but for much carrying my pick would be the S&W .22 "Kit Gun" (Model 34 I think). I have the aluminum frame and cylinder Model 43 Kit Gun (14 oz.) that I carry any time I am in the woods, and so light I don't know I have it on.

[Darreld Walton]

I really, REALLY like my Model 18, but very close second is my Model 63, though I had to put larger grips on it to be comfortable to shoot. Shot High Standard revolvers when I was a teenager, as did my buds, and they're functional, fairly rugged, and accurate. Some of the later, steel framed Harrington and Richardson revolvers were pretty nice. I always wanted one of the top break H&R's, but never got round to putting one in the safe.

[free1954]

if you look around the used gun racks you are likely to find something. have you looked at the rossi PLINKER ?

[Allen]

if you look around the used gun racks you are likely to find something. have you looked at the rossi PLINKER ?

That DOES look like a nice pistol--didn't know it existed. I have a Taurus M94 SS 9 shot 5" that shoots well but didn't recommend it due to so many others having problems with them as per internet user reviews. Rossi merged with Taurus so I suppose this is the current product of that. Later Rossi's were great guns. I have some M88's (SS 38 special 2") and M971's (SS 357) that to me are just a step below a Smith. After the merger/buyout it appears that Taurus makes everything now.

https://www.gunbroker.com/item/793284929

[retread12345]

Had a Taurus .22 mag, fun gun but the ammo too pricey. I am sure they produce a model in .22 long rifle

[Clark Howard]

Top of the .22 heap is the S&W K-frame 6 inchers. Just as good, the Ruger Single-Six is tough and accurate. The High Standard Sentinel is cheaper, not as good looking, but works just as well as any. Regards, Clark

[JB White]

I have played with quite a few rimfire revolvers over the years. The two I have had the longest and can't be talked out of are the S&W Mod 18 and the Ruger Super Single Six.
The others makers all had shortcomings whether a major drawback or minor glitches. Something in regard to reliability, accuracy, ease of handling....something always left me flat including poor sights or part breakage.

The worse one I had experiences with were a pair of Taurus 94's. One in blue the other in stainless. Constant misfires. Taurus "repaired" them under warranty with a set of 17 ton springs which took the joy out of shooting. (Methinks Taurus missed something in the rimfire geometry because I still have a 3" Model 85.)
In SA, neither 94's compared with the accuracy of the S&W or the Ruger. The Ruger is fine accuracy-wise in 22LR but really shines with the 22WMR cylinder installed.

Having said all that, I confess never having owned a Colt rimfire.

[Allen]

Having said all that, I confess never having owned a Colt rimfire.

Me neither and the only one that I can think of that fits the bill is the Colt Diamondback which is long out of production. Surely a nice gun but for the $1500-$2000 cost to own one I'll take a couple of Smiths any day even if the Colt was still available.

https://www.gunbroker.com/All/search...%20diamondback

On 2nd thought I forgot about the Colt SAA. My father in law had one of the later ones. It had an aluminum frame like the RG66 I bought back in 1971 for $27. Not impressed with either and there is very little difference between them.