Any thoughts on the 1917 .45 Colt/S&W revolvers?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lpcullen
    Super Moderator
    • Jul 2022
    • 31

    #16
    I seldom shoot my S&W 1917 but when I do I use handloaded .45 auto rim. Not a big fan of the moon clips. Removing the spent cases is always tedious. I've handled the Colts but never owned one.

    Comment

    • Johnny P
      Senior Member
      • Aug 2009
      • 6258

      #17
      They make a tool for removing the cases from the clips, but I just shoot mine without the clips. Only takes a few seconds to remove the fired cases one at the time.

      Comment

      • Vern Humphrey
        Administrator - OFC
        • Aug 2009
        • 15875

        #18
        .45 Auto Rim is easy to get and not all that expensive. I loaded up 500 rounds for a friend of mine (he has the Colt) a year of so ago.

        Comment

        • jon_norstog
          Senior Member
          • Sep 2009
          • 3896

          #19
          Originally posted by Vern Humphrey
          .45 Auto Rim is easy to get and not all that expensive. I loaded up 500 rounds for a friend of mine (he has the Colt) a year of so ago.
          Thanks a lot Vern. I didn't know they even still made the stuff!

          jn

          Comment

          • Vern Humphrey
            Administrator - OFC
            • Aug 2009
            • 15875

            #20
            I bought an M1917 Colt in a pawn shop in Batesville, AR in '61 or '62 for about $15-$20 (couldn't 't have been more -- I didn't have more in those days.) I gave it to a girl who loved to ride through the hills -- she had ridden up on some unsavory characters. But with that big iron on her hip, that problem went away.

            I bought a New Service in .45 Colt for $350 several years back. It had been reblued and shot high and to the left. After trying everything, I cut the barrel to 5 1/2", put on adjustable sights and Herrett Shooting Master grips. I carry it in an El Past Saddlery pancake holster, and it conceals well with a shirt draped over it.

            I like a 255 grain Wide Flatnose or a semi-wadcutter of the same weight loaded ahead of 11 grains of HS 6.

            Comment

            • Vern Humphrey
              Administrator - OFC
              • Aug 2009
              • 15875

              #21
              Originally posted by jon_norstog
              You've got me on that one. I wasn't in the Army and I never heard of dummy rifles. I was in the Coast Guard, we didn't get bayonet training. But I did learn how to deliver a baby.

              jn
              In the 19th Century, the Army used "fencing muskets" for bayonet training. Later on, for serious bayonet training we simply left the scabbards on the blades, or use pugil sticks.

              Comment

              • Allen
                Moderator
                • Sep 2009
                • 10580

                #22
                Originally posted by jon_norstog
                You've got me on that one. I wasn't in the Army and I never heard of dummy rifles. I was in the Coast Guard, we didn't get bayonet training. But I did learn how to deliver a baby.

                jn
                Somewhere at my Mother's house we have a dummy 1903 Springfield. It was there at the house when I was a kid. It has a wood stock and steel barrel and other hardware. No parts, including the stock will interchange with the real guns. It looks a little like a Hollywood prop gun but cheaper looking/not detailed much.

                I think it is a 03 rifle but it would pass for any rifle as far as training goes.

                I believe it was intended to look fake enough to not be confused with a real rifle. You couldn't take this gun into a bank and expect to rob it unless the bank clerk was very dumb, blind, or just wanted to be robbed.
                Last edited by Allen; 05-20-2023, 09:24.

                Comment

                • Vern Humphrey
                  Administrator - OFC
                  • Aug 2009
                  • 15875

                  #23
                  Originally posted by Allen
                  Somewhere at my Mother's house we have a dummy 1903 Springfield. It was there at the house when I was a kid. It has a wood stock and steel barrel and other hardware. No parts, including the stock will interchange with the real guns. It looks a little like a Hollywood prop gun but cheaper looking/not detailed much.

                  I think it is a 03 rifle but it would pass for any rifle as far as training goes.

                  I believe it was intended to look fake enough to not be confused with a real rifle. You couldn't take this gun into a bank and expect to rob it unless the bank clerk was very dumb, blind, or just wanted to be robbed.
                  I'd have to see it to be sure -- but when I was a kid, you could buy those as a toy. One of the giveaways was the cocking knob was made of wood.

                  Comment

                  • JimF
                    Senior Member
                    • Aug 2009
                    • 1179

                    #24
                    Originally posted by Allen
                    Somewhere at my Mother's house we have a dummy 1903 Springfield. It was there at the house when I was a kid. It has a wood stock and steel barrel and other hardware. No parts, including the stock will interchange with the real guns. It looks a little like a Hollywood prop gun but cheaper looking/not detailed much.

                    I think it is a 03 rifle but it would pass for any rifle as far as training goes.

                    I believe it was intended to look fake enough to not be confused with a real rifle. You couldn't take this gun into a bank and expect to rob it unless the bank clerk was very dumb, blind, or just wanted to be robbed.
                    I believe you are talking about the “Paris-Dunn” training rifle.

                    Pop bought me one back in 1950 (or thereabouts.)
                    The local Army/Navy store had them in a wooden barrel . . . . .$4 per piece.

                    I still have it!

                    Comment

                    • Allen
                      Moderator
                      • Sep 2009
                      • 10580

                      #25
                      I haven't seen it in decades. I remember neither me nor my brother played with it. It wouldn't fire live rounds, blanks, BB's, nor caps and you couldn't toss lit firecrackers down the barrel so what good was it to us?

                      Comment

                      • Art
                        Senior Member, Deceased
                        • Dec 2009
                        • 9256

                        #26
                        I saw a nice S&W Model 1950 military (civilian version of the M1917) in a pawn shop the other day. I had to enlighten the pawn broker on the actual caliber and the need for half moon or moon clips to make it extract properly. It was a 5 screw without an ejector rod shroud and if it hadn't been for a couple of spots where it had been exposed to moisture that caused some light pitting in two small spots would probably have had 90% of the original finish. Really nice gun but at $1,400.00 a fair price but not cheap.
                        Last edited by Art; 06-16-2023, 06:41. Reason: Accuracy

                        Comment

                        • Vern Humphrey
                          Administrator - OFC
                          • Aug 2009
                          • 15875

                          #27
                          I bought a Colt M1917 for about $10 around 1960 and gave it to a girlfriend who used to go riding in the woods alone. She eventually passed it on to her youngest son, who never fired it. When I found out about that last year, I loaded up 500 rounds of .45 Auto Rim for him.

                          Comment

                          Working...