H&R model 732

[Major Tom]

I acquiered this revolver recently. It is 32 S&W caliber. Rough shape but is cleaning up nicely. I need to know how to disassemble it to check out the inner mechanism as the trigger will not release the hammer. Where to find info? Thanks

[RED]

Tom: Here's all I could find.

The .22 and .32 are essentially the same.

http://stevespages.com/ipb-handr-922.html

http://www.gunpartscorp.com/Manufact.../732-38093.htm

To make it easier to put together, find some finish nails the same diameter as the pins, and cut to length, make slave pins out of them, use them to assemble the trigger group, slide it into the frame, and install the frame pins to push them out.

[JB White]

For some more help you can check out the H&R forums at Graybeard Outdoors. Here's a link to the handgun forum so you can lurk before signing on:

http://www.go2gbo.com/forums/misc-hr-talk-collectibles-handguns-etc/

[Major Tom]

Thank you gentlemen