m73b1 "serial Number" change

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • kicker
    Senior Member
    • Dec 2018
    • 102

    #1

    m73b1 "serial Number" change

    Hi, Would anyone have a idea at about what number Weaver switched from Electro penciling the words "serial number" and went to stamped. I have a large gap in these numbers on my small serial number list.
    Thanks scott
  • kicker
    Senior Member
    • Dec 2018
    • 102

    #2
    Today a member gave me his scope number 10809 which has the words Serial Number roll stamped. I have a photo of 11775 with still has the electro pencil "serial Number." Did the Roll stamped and electro penciled "Serial Number" scopes exist together for some time?
    thanks scott

    Comment

    • Johnny P
      Senior Member
      • Aug 2009
      • 6258

      #3
      I would think that the scope serial number was probably applied some time after the SERIAL NO. was applied to the tube, and wouldn't necessarily be in strict serial number order.

      Comment

      • k arga
        Senior Member
        • Aug 2009
        • 565

        #4
        My scope is electro pen ser 3932

        Comment

        • kicker
          Senior Member
          • Dec 2018
          • 102

          #5
          your scope is a 330? Could you share a few photos of your scope, It'a early one on my list If's easier you can send them to jokerman115@aol.com. Anyone else if is welcome to share,
          thanks scott
          Last edited by kicker; 02-11-2020, 08:49.

          Comment

          • k arga
            Senior Member
            • Aug 2009
            • 565

            #6
            Mr Kicker, wish I could but have no idea how to do or send pics, sorry.

            kurt

            Comment

            • kicker
              Senior Member
              • Dec 2018
              • 102

              #7
              no, problem Kurt, your scope is roll marked 330 on the data plate and m73b1 with serial number electro penciled on the tube is this correct?

              Comment

              • k arga
                Senior Member
                • Aug 2009
                • 565

                #8
                Yes sir, that is how it is marked.

                Comment

                • kicker
                  Senior Member
                  • Dec 2018
                  • 102

                  #9
                  thanks

                  Comment

                  • paul v
                    Senior Member
                    • Aug 2009
                    • 116

                    #10
                    Kicker, here are karga's scope pics:
                    IMG_20200309_180445119.jpgIMG_20200309_180345728_BURST001.jpg
                    "Democracy is two wolves and a lamb voting on what to have for lunch. Liberty is a well armed lamb contesting the outcome of the vote" Benjamin Franklin

                    Comment

                    • Johnny P
                      Senior Member
                      • Aug 2009
                      • 6258

                      #11
                      Paul's scope is a good example of the electro penciled TELESCOPE M73B1, and the scope serial number not being applied by the same person.

                      Comment

                      • k arga
                        Senior Member
                        • Aug 2009
                        • 565

                        #12
                        Paul's going to have to wait a little longer before it's his, I'm not ready to go yet.
                        kurt {dad}

                        Comment

                        • Johnny P
                          Senior Member
                          • Aug 2009
                          • 6258

                          #13
                          Sounds like a family problem.

                          Comment

                          • Punch the Clown
                            Senior Member
                            • Aug 2012
                            • 172

                            #14
                            These are some lousy pics. The scope looks way better and isn't rusty but I don't have any better pics. That brown crud is some sort of sealer between the scope tube and the ident plate.



                            Last edited by Punch the Clown; 04-27-2020, 08:44.

                            Comment

                            • jangle
                              Member
                              • Oct 2010
                              • 51

                              #15
                              Just seeing this tread.
                              My scope is roll stamped both M73B1 and serial number, with the serial number, 19094 being electro penciled.

                              Comment

                              Working...