Soviet PSM pistol 5,45x18mm

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • RCS
    Senior Member
    • Aug 2009
    • 2180

    #1

    Soviet PSM pistol 5,45x18mm

    I know some were imported to Canada in the very early 1990's and some were
    presented to US Officals and military (one was reported engraved). Over the
    years there have been two or three PSM pistols on US Auctions ($3000 plus
    range). This has to be a really "rare" Soviet pistol, has anyone addition information
    about these in the USA ?dscn2910.jpg
  • bruce
    Senior Member
    • Sep 2009
    • 3759

    #2
    Initially looks to be a very workable pistol. Will follow this thread with interest. Sincerely. bruce.
    " Unlike most conservatives, libs have no problem exploiting dead children and dancing on their graves."

    Comment

    • RCS
      Senior Member
      • Aug 2009
      • 2180

      #3
      PSM

      From the information available, the Soviet design PSM was introduced around the
      early 1970's to provide high ranking officials and military a small pistol for protection.

      The 5,45x18mm cartridge is claimed to penetrate soft body armor, the pistol is
      blow-back and very thin. These cartridges are very difficult to locate now in their
      original military loading. Some reloaders are able to make the 5,45 cartridge out
      of the 22 Hornet case. The Hornet case has the rim turned-off and a extractor groove
      cut on a lathe. Reloading dies are available.

      My photo shows some 5,45x18mm cartridges (original military load) with a 38 Special
      cartridge for comparisonP1010043.jpg

      Comment

      Working...