30 luger snap caps

[Major Tom]

Where to find them? Need good 'snap caps'.
Thank you

[Sunray]

Highly unlikely you'll find any of 'em. That cartridge is decidedly unusual. You might be able to make a few out of a spent cartridge and some pencil erasers.

[Major Tom]

Highly unlikely you'll find any of 'em. That cartridge is decidedly unusual. You might be able to make a few out of a spent cartridge and some pencil erasers.

Done that! Erasers don't take many hits from the firing pin before they crumble.

[IditarodJoe]

This is an older post, but it might be a lead: http://luger.gunboards.com/showthrea...source-located

[PWC]

Make a dummy round and fill the primer pocket with silicone RTV. Works for my rifles and handguns.

[High Plaines Doug r]

I 2nd the silicone sealant/RTV solution. I can barely tell the used caps I've made from unused ones. The RTV is resilient enough that there is no impression left by the Firing pin.