9mm Parabellum question

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • S.A. Boggs
    Senior Member
    • Aug 2009
    • 8568
    #1

    9mm Parabellum question

    Have just started resizing mixed brass, some which I have verified as coming from Glock handguns. My machine/dies are Dillon. I have noted no bulge in the brass and have checked the brass against my P226 barrel and the brass goes in freely and fits well. Am I missing something to look for?
    Sam
    Tags: None
    • Phloating Phlasher
      Senior Member
      • Apr 2023
      • 508
      #2
      I don't think so. you just got lucky is my guess.

        Comment

        • barretcreek
          Senior Member
          • Sep 2013
          • 6065
          #3
          Check for excess length?

            Comment

            • S.A. Boggs
              Senior Member
              • Aug 2009
              • 8568
              #4
              Originally posted by barretcreek
              Check for excess length?
              All the brass that I have checked so far are good to go. Going to call Dillon and ask them what is up.
              Sam

                Comment

                • S.A. Boggs
                  Senior Member
                  • Aug 2009
                  • 8568
                  #5
                  Just talked to Dillon, their dies can take out the bulge and the .40 is the same.
                  Sam

                    Comment

                    Previous template Next
                    Working...