OOPS!

[nf1e]

Goofing around in the shop yesterday I wanted to see what would happen if too small a neck sizing bushing was used on a freshly annealed Lapua .223 case and the run in a mandrel. Not too surprised, but a bit of a chuckle on what came out. I normally try to use a bushing that will size to just under where I want to be and then run the mandrel. Lapua has thicker neck walls than Starline so a larger bushing needs to be used. Whatta Hobby!

IMG_4199.jpg IMG_4200.jpg

[nf1e]

In the Holiday Spirit !

IMG_4201.jpg

[Allen]

You may have created a new "round".

[PWC]

Goofing around in the shop yesterday I wanted to see what would happen if too small a neck sizing bushing was used on a freshly annealed Lapua .223 case and the run in a mandrel. Not too surprised, but a bit of a chuckle on what came out. I normally try to use a bushing that will size to just under where I want to be and then run the mandrel. Lapua has thicker neck walls than Starline so a larger bushing needs to be used. Whatta Hobby!

IMG_4199.jpg IMG_4200.jpg

Looks like a Nagant Improved...