Neck turning.

[nf1e]

Well, some friends have convinced me to turn necks on a batch of new Lapua .308 Palma brass. Working on 100 this morning. Finished 50 taking the neck thickness down from .016-.017 to .015. Feels normal to get this gear back out and in service again. Will see if there is as big a difference as my friends tell me there will be. Used to be common practice, for me, with surplus brass but haven't turned necks since going to Lapua. Whatta Hobby!

IMG_4251.jpg IMG_4252.jpg

[lyman]

excellent timing, non reloading related, reminded me I needed to pump up and use my neck brace thingy,
3 minutes on, 1 minute off, x3 and it helps a compressed disc or 2

[PWC]

Sometimes on you-tube there are some real oriental head / neck turners...be careful...LOL

[nf1e]

Might just have to take a look. Wouldn't be able to do much other than that these days. Life is good.

[nf1e]

Doing a little experiment with some LC 01 brass turned to .014 neck thickness, HBN coated 110 gn Sierra varminters over 46 gn of Varget. Dang I love playing. Whatta Hobby!

IMG_4255.jpg