45 ACP primer sizes???

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dave in NGA
    Senior Member
    • Jun 2010
    • 968

    #1

    45 ACP primer sizes???

    I haven't loaded any 45's in many years. So after a match I was policing brass and came across some Federal and Winchester brass with small pistol primer sizes. Is this stuff reloadable? Why the small primer sizes? Or should I just toss them out? TIA
  • edpm3
    Senior Member
    • Sep 2009
    • 190

    #2
    Absolutely reloadable. Don't know why some manufacturers go with small primers for 45 ACP, but for some people, it does eliminate the need for large pistol primers. For the rest of us, it means carefully sorting empty .45 cases so we don't end up trying to jam a LP primer into a SP pocket.

    Comment

    • Tuna
      Senior Member
      • Aug 2009
      • 2686

      #3
      I may be wrong on this but I think originally the small pistol primers were used for ammo that had no lead at all. None in the primer and no exposed lead from the bullet of any kind. If Ray comes around he may be able to shed some light on this.

      Comment

      • raymeketa
        Senior Member
        • Dec 2010
        • 884

        #4
        Many handgun cartridges have a history of being loaded with both small and large primers. The 38 Special and the 357 Magnum are the 2 best known. The 45 ACP was originally loaded with a special size primer, just a little smaller in size than LP, to make sure the cases were not primed with LR primers. But most have been standardized as either SP or LP. . . Until recently.

        Tuna nailed it. The small primers found in some of today's handgun cartridges are part of the "Green" generation. Lead-free, Non-Toxic, etc. Orginally, the green primers used Diazodinitrophenol, as the the impact-sensitive ingrediant, replacing lead styphnate. By now, it's probably been replaced with something having an even longer name.

        Comment

        • joem
          Senior Member, Deceased
          • Aug 2009
          • 11835

          #5
          "The 45 ACP was originally loaded with a special size primer, just a little smaller in size than LP, to make sure the cases were not primed with LR primers."

          Surprised that someone else has knowledge of this. A friend had 1K of these that I modified to take LP so he could load them. Good brass.

          Comment

          • raymeketa
            Senior Member
            • Dec 2010
            • 884

            #6
            Us collectors know a lot of stuff. Most of it is trivial with not a lot of useful value.

            Here's a box of the smaller sized LP primers. As you can see, they were still being used into the late 1940s.

            Ray

            Comment

            • Sunray
              Senior Member
              • Sep 2009
              • 3251

              #7
              Winchester brass with small pistol primer sizes started out as their NT(Non-Toxic) primer brand. They said the brass was not reloadable, at the time. Instead of saying they weren't releasing NT primers to reloaders. Regular small pistol primers work just fine. Only issue is if you mix NT cases with regular cases.
              "...Most of it is trivial with..." Yep. Hard thing being a fountain of useless information. Worse if you work with 20 something's who think they know everything. Telling 'em their education is lacking shuts 'em up quickly though. snicker.
              Spelling and grammar count!

              Comment

              • psteinmayer
                Senior Member
                • Sep 2011
                • 1527

                #8
                I have a box of 50 rounds of Fiocchi .45 ACP brass with SP primers. I have so much other brass that I never added it to my reloading supply. I'll hang on to them though... just in case.
                "I was home... What happened? What the Hell Happened?" - MM1 Jacob Holman, USS San Pablo

                Comment

                • emmagee1917
                  Senior Member
                  • Sep 2009
                  • 1492

                  #9
                  I reload both behind 5.3 grains of Win 231 . Can't tell any difference , work the same through M1911s , M1917s , M1928A1s , M1A1s , M50s , M55s , M3s , M3A1s .
                  Nice to be able to use whatever size primer I can buy. I usually take out an ammo can or two of one primer size so as to not have to sort them . I use a RCBS hand primer , so not a big deal if a piece of range brass gets mixed in . Many reloaders don't want to deal with two sizes , I've received lots of free , once fired brass that way.
                  Chris

                  Comment

                  • Timberwolf
                    Senior Member
                    • Aug 2009
                    • 140

                    #10
                    I load both, and use the same powder charge. I've noticed no velocity change between either.

                    The SP brass is prefered by revolver shooters. I use them at lost brass matches.
                    Certified Glock, SIG, Beretta, S&W, Rem870 Armourer.

                    Proud member of WTFDTSG Club.

                    Nice Try = You Suck spelled differently.

                    Comment

                    • joem
                      Senior Member, Deceased
                      • Aug 2009
                      • 11835

                      #11
                      I don't save the ones with small primers. They don'r really work well in my 650 so they go to the scrap bucket.

                      Comment

                      • mikld
                        Member
                        • Oct 2013
                        • 69

                        #12
                        Several years ago, when small primed 45 ACP brass started showing up for reloaders, I read an article in a gun rag about them (Originally intended for "NT" ammo). The author compared several loads, identical except for the primer and shot them across a chrony. Results were, on an average, the small primed loads were approx. 20-25 fps slower than the large primed loads (many loads were nearly identical velocity).

                        Comment

                        • S.B.
                          Senior Member
                          • Aug 2009
                          • 241

                          #13
                          Back to one of the original question, Why were these introduced when LP primers has been the standard for so long?
                          Steve
                          Last edited by S.B.; 10-13-2015, 04:16.
                          The Original Point and Click Interface was a Smith & Wesson

                          Comment

                          • emmagee1917
                            Senior Member
                            • Sep 2009
                            • 1492

                            #14
                            They had a small primer production line going for clean indoor range loads in the .38 and 9mm . It was cheeper to make SP .45 cases for that than opening a LP production line .
                            Chris

                            Comment

                            • S.B.
                              Senior Member
                              • Aug 2009
                              • 241

                              #15
                              emagee1917, how are SPP greener than LPP? I personally, don't see the logic in your statement? IIRC, I was taught in lead abatement class lead poisoning only effects children under the age of 8(for the most part). How many children 8 or younger do you see on indoor ranges? By the way where did you get this information from?
                              Steve
                              Last edited by S.B.; 10-12-2015, 09:51.
                              The Original Point and Click Interface was a Smith & Wesson

                              Comment

                              Working...