Tweet
After hours of setting up this press I ran some 9mm brass thru it. Some brass resized OK, but, mostly NOT! The ram comes loose from the aluminum plate/assembly that holds the shell carrier. That assembly will stay in the up position while the ram is lowered. I then have to unscrew the sizing die to get the brass case out. So far I think this reloader is junk. I did replace the useless ball chain on the powder measure with a spring as the dern chain kept breaking. HELP! and thank you!
-
-
After reading your post, I'll stick to Dillon. -
Sell it. It's penny wise and pound foolish to own one. Next will be the powder jamming the powder measurePhillip McGregor (OFC)
"I am neither a fire arms nor a ballistics expert, but I was a combat infantry officer in the Great War, and I absolutely know that the bullet from an infantry rifle has to be able to shoot through things." General Douglas MacArthurComment
Comment