Gouged buttstock

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • deadin
    Member
    • Mar 2010
    • 80

    #1

    Gouged buttstock

    I recently picked up this M1886 Rifle. It is in nice shape and should make a good shooter.
    However there is this big honking gouge in the middle the right side of the buttstock.
    I'm guessing there was some sort of a property mark or something there that somebody decided to do away with.

    Any guesses or opinions as to just what it might have been??

    The serial number is 465161 and the cartouche is 1889.



    Thanks,
    Dean
  • Tom Trevor
    Senior Member
    • Aug 2009
    • 566

    #2
    Perhaps a property mark from some previous owner?

    Comment

    • mr.j
      Senior Member
      • Feb 2012
      • 141

      #3
      Thats what you call a gouge LOL that's nothing more than a nick, Check my pic below. Now this is what you call a gouge

      IMG_7533.jpg

      Comment

      • deadin
        Member
        • Mar 2010
        • 80

        #4
        That looks more like half of the buttstock sloughed off....

        Comment

        • Merc
          Senior Member
          • Feb 2016
          • 1690

          #5
          Originally posted by deadin
          I recently picked up this M1886 Rifle. It is in nice shape and should make a good shooter.
          However there is this big honking gouge in the middle the right side of the buttstock.
          I'm guessing there was some sort of a property mark or something there that somebody decided to do away with.

          Any guesses or opinions as to just what it might have been??

          The serial number is 465161 and the cartouche is 1889.



          Thanks,
          Dean
          There are companies out there that refinish rifle stocks and may be able to repair the gouge without removing too much surrounding wood. East Coast Bluing is one.
          Last edited by Merc; 09-03-2016, 10:31.

          Comment

          • mr.j
            Senior Member
            • Feb 2012
            • 141

            #6
            A little boiled linseed oil and some fine sand paper should do the trick. looks like a very easy do it yourself fix. It dont look that bad i would just leave it,

            Comment

            • musketshooter
              Senior Member
              • Sep 2009
              • 521

              #7
              That damage is part of the history of that rifle. These marks give the rifle character. Just put a little stock finish in it and seal the wood.

              Comment

              • Merc
                Senior Member
                • Feb 2016
                • 1690

                #8
                Here's another stock restorer: www.trfindley.com

                So, now deadin can consider all possibilities. He can leave that "big honking gouge" alone, fix it himself or have it refinished by a pro. All are good choices.

                Comment

                • Merc
                  Senior Member
                  • Feb 2016
                  • 1690

                  #9
                  Originally posted by mr.j
                  Thats what you call a gouge LOL that's nothing more than a nick, Check my pic below. Now this is what you call a gouge

                  [ATTACH=CONFIG]37338[/ATTACH]
                  Yeah, that's a big one. Possibly battle damage?

                  Comment

                  • psteinmayer
                    Senior Member
                    • Sep 2011
                    • 1527

                    #10
                    My 1873 rifle had a brass plate attached with brass tacks which my father removed... leaving quite a lot of character. The tacks were also down the fore end of the stock on both sides. I have no idea what they were put there for or what the brass plate had on it (dad tossed them all when he removed them) but he bought the trapdoor from an old farmer.

                    1873 Springfield Trapdoors 051.jpg
                    "I was home... What happened? What the Hell Happened?" - MM1 Jacob Holman, USS San Pablo

                    Comment

                    Working...